Home › BRAKE › BRAKE CONTROL › VSC OFF SWITCH

VSC OFF SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL VSC OFF SWITCH


    C165814E03
  1. Engage the 2 claws and install the VSC off switch.



2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)


    B168371
  1. Connect the hood lock control cable assembly.

  1. Connect each connector.

  1. Engage the 3 claws and 10 clips.

  1. Install the lower instrument panel finish panel sub-assembly with the 2 bolts <B>.



3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Automatic Air Conditioning System)


    B173009
  1. Connect the hood lock control cable assembly.

  1. Connect each connector and the aspirator duct.



    B173021
  1. Engage the 3 claws and 10 clips.

  1. Install the lower instrument panel finish panel sub-assembly with the 2 bolts <B>.



4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY


    B173227
  1. Engage the claw and clip, install the cowl side trim sub-assembly LH.

  1. Install the clip.



5. INSTALL FRONT DOOR SCUFF PLATE


    B173224
  1. Engage the guide and the 8 claws, and install the front door scuff plate LH.



6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. (Click here)



7. CHECK FOR WARNING LIGHT AND INDICATOR LIGHT

HINT:
(Click here).