89650
1.INSTALL POWER STEERING ECU ASSEMBLY
|
Bolt |
|
Terminal Bolt |
Install the power steering ECU assembly to the power steering motor assembly with the 2 bolts.
Install the 3 terminal bolts.
Engage the 4 claws to install a new No. 2 power steering ECU protector.
Connect the 2 connectors to the power steering ECU assembly.
| *a | Start position of tape |
Apply new tape.
Wrap the power steering motor wire harness and torque sensor wire harness with tape 2 times from the start position of the tape shown in the illustration (for LHD).
Wrap the power steering motor assembly and power steering ECU assembly with tape more than 3 times.
F1901
2.INSTALL ECU WIRE SUB-ASSEMBLY
8965A
3.INSTALL POWER STEERING ECU PROTECTOR
4.INSTALL STEERING POST ASSEMBLY
5. ASSIST MAP WRITING