Home › Engine / Hybrid System › 1AR-FE LUBRICATION › OIL PUMP
RM3160E _51 Engine / Hybrid System _019677 1AR-FE LUBRICATION _0105660 OIL PUMP A

1AR-FE LUBRICATION  OIL PUMP  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

Do not remove the oil pump or oil pump relief valve from the timing chain cover sub-assembly.


PROCEDURE

Hide 1.REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

Hide 11201 3.REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY

Hide 11301K 4.REMOVE CRANKSHAFT POSITION SENSOR

Hide 12315A 6.REMOVE ENGINE MOUNTING BRACKET RH

a.
A203574

Remove the 5 bolts and engine mounting bracket RH.


Hide 16620 7.REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

Hide 11310 8.REMOVE TIMING CHAIN COVER SUB-ASSEMBLY

a.
A196847

Remove the 17 bolts and 2 nuts.


b.
A297601

Remove the timing chain cover sub-assembly by prying between the timing chain cover sub-assembly and cylinder head sub-assembly, camshaft housing sub-assembly, cylinder block and stiffening crankcase assembly with a screwdriver as shown in the illustration.

NOTICE:

Be careful not to damage the contact surfaces of the cylinder head sub-assembly, camshaft housing sub-assembly, cylinder block, stiffening crankcase assembly or timing chain cover sub-assembly.


HINT:

Tape the screwdriver tip before use.



c.
A196858

Remove the 2 oil pump gaskets and oil hole cover gasket from the stiffening crankcase assembly.


Hide 11301C 9.REMOVE TIMING CHAIN COVER OIL SEAL

a.
A210537C09
1.906,0.302 2.052,0.656 false 1.75,0.115 1.938,0.292 0.188,0.177 10 false *a
*a Wooden Block


Using a screwdriver and wooden block, pry out the timing chain cover oil seal.

NOTICE:

Do not damage the surface of the timing chain cover oil seal press fit hole.


HINT:

Tape the screwdriver tip before use.