Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on 4 Windows)
RM3160E _59 Vehicle Exterior _019717 WINDOW / GLASS _0106113 POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on 4 Windows) J

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on 4 Windows)  Remote Up / Down Function does not Operate  


DESCRIPTION

When the ignition switch is ON, the power window regulator master switch assembly sends remote up and down signals to each power window regulator motor assembly via LIN communication.

WIRING DIAGRAM

B361444
0.417,1.073 2.458,1.406 2.042,0.333 10 false Power Window Regulator Master Switch Assembly 4.406,1.073 7.01,1.448 2.604,0.375 10 false Power Window Regulator Motor Assembly (for Front Passenger Door) 0.958,3.385 2.823,3.573 1.865,0.188 10 false : LIN Communication Line 0.438,2.594 2.406,2.99 1.969,0.396 10 false Power Window Regulator Motor Assembly (for Rear LH Door) 4.813,2.604 6.771,2.979 1.958,0.375 10 false Power Window Regulator Motor Assembly (for Rear RH Door)

CAUTION / NOTICE / HINT

NOTICE:
·

The power window control system uses the LIN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Troubleshoot the power window control system after confirming that the communication system is functioning properly.

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on 4 Windows)>HOW TO PROCEED WITH TROUBLESHOOTING

·

If a power window regulator motor assembly has been replaced with a new one, initialize the power window control system.

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on 4 Windows)>INITIALIZATION

·

As the door control battery is installed between the vehicle battery and main body ECU (multiplex network body ECU), first perform the inspections in On-Vehicle Inspection to confirm that there are no malfunctions in the power source circuit for the main body ECU (multiplex network body ECU) before performing this troubleshooting procedure.*

Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>ON-VEHICLE INSPECTION

*: for LHD



PROCEDURE

1.READ VALUE USING GTS (MAIN BODY)
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Main Body / Data List.


e.

Read the Data List according to the display on the GTS.

Body Electrical > Main Body > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Communication P-Door Motor Connection status between power window regulator motor assembly (for front passenger door) and main body ECU (multiplex network body ECU) STOP or OK STOP: Communication stopped
OK: Normal communication
-
Communication RR-Door Motor Connection status between power window regulator motor assembly (for rear RH door) and main body ECU (multiplex network body ECU) STOP or OK STOP: Communication stopped
OK: Normal communication
-
Communication RL-Door Motor Connection status between power window regulator motor assembly (for rear LH door) and main body ECU (multiplex network body ECU) STOP or OK STOP: Communication stopped
OK: Normal communication
-
Communication Master SW Connection status between power window regulator master switch assembly and main body ECU (multiplex network body ECU) STOP or OK STOP: Communication stopped
OK: Normal communication
-
Body Electrical > Main Body > Data List
Tester Display
Communication P-Door Motor
Communication RR-Door Motor
Communication RL-Door Motor
Communication Master SW
50003 123 64,65,66,70
OK:

On the GTS screen, OK is displayed.



Result:
Proceed to
OK
NG



OK

2.READ VALUE USING GTS (MASTER SWITCH)

NG

GO TO LIN COMMUNICATION SYSTEM (Proceed to How to Proceed with Troubleshooting)

2.READ VALUE USING GTS (MASTER SWITCH)
a.

Enter the following menus: Body Electrical / Master Switch / Data List.


b.

Read the Data List according to the display on the GTS.

Body Electrical > Master Switch > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
P Door P/W Auto SW Front passenger door power window auto up and down switch signal OFF or ON OFF: Front passenger door power window auto switch not being operated
ON: Front passenger door power window auto switch being operated
-
RR Door P/W Auto SW Rear RH door power window auto up and down switch signal OFF or ON OFF: Rear RH power window auto switch not being operated
ON: Rear RH power window auto switch being operated
-
RL Door P/W Auto SW Rear LH door power window auto up and down switch signal OFF or ON OFF: Rear LH power window auto switch not being operated
ON: Rear LH power window auto switch being operated
-
P Door P/W Up SW Front passenger door power window manual up switch signal OFF or ON OFF: Front passenger door power window manual up switch not being operated
ON: Front passenger door power window manual up switch being operated
-
RR Door P/W up switch Rear RH door power window manual up switch signal OFF or ON OFF: Rear RH power window manual up switch not being operated
ON: Rear RH power window manual up switch being operated
-
RL Door P/W up switch Rear LH door power window manual up switch signal OFF or ON OFF: Rear LH power window manual up switch not being operated
ON: Rear LH power window manual up switch being operated
-
P Door P/W Down SW Front passenger door power window manual down switch signal OFF or ON OFF: Front passenger door power window manual down switch not being operated
ON: Front passenger door power window manual down switch being operated
-
RR Door P/W Down SW Rear RH door power window manual down switch signal OFF or ON OFF: Rear RH power window manual down switch not being operated
ON: Rear RH power window manual down switch being operated
-
RL Door P/W Down SW Rear LH door power window manual down switch signal OFF or ON OFF: Rear LH power window manual down switch not being operated
ON: Rear LH power window manual down switch being operated
-
Window Lock Switch Status Window lock switch signal OFF or ON OFF: Window lock switch UNLOCK position
ON: Window lock switch LOCK position
-
Body Electrical > Master Switch > Data List
Tester Display
P Door P/W Auto SW
RR Door P/W Auto SW
RL Door P/W Auto SW
P Door P/W Up SW
RR Door P/W up switch
RL Door P/W up switch
P Door P/W Down SW
RR Door P/W Down SW
RL Door P/W Down SW
Window Lock Switch Status
50003 148 2,3,4,5,6,7,15,16,17,20
OK:

On the GTS screen, ON or OFF is displayed accordingly.



Result:
Result Proceed to
NG A
OK (Front passenger door power window remote up and down function does not operate) B
OK (Rear LH door power window remote up and down function does not operate) C
OK (Rear RH door power window remote up and down function does not operate)



A

REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

B

REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR FRONT PASSENGER DOOR)

C

REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR REAR LH DOOR OR REAR RH DOOR)