This symptom may occur for any of the windows.
The jam protection function operates within a specified range during the manual up or auto up operation.
If a power window regulator motor assembly has been replaced with a new one, initialize the power window control system.
If the pulse sensor built into the power window regulator motor assemblies are malfunctioning, the power window control system enters fail-safe mode. The jam protection function cannot be operated during fail-safe mode.
Initialize the power window regulator motor assembly (applicable location).
| Proceed to |
|---|
| NEXT |
NEXT
Check if the power window auto up and down function operates normally.
Auto up and down function is normal.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Check if the jam protection function operates normally for the applicable power window.
The jam protection function will not operate within 4 mm (0.157 in.) of the fully closed position.
Jam protection function operates normally.
| Result | Proceed to |
|---|---|
| OK | A |
| NG (Driver door power window) | B |
| NG (Front passenger door power window) | |
| NG (Rear LH door power window) | C |
| NG (Rear RH door power window) |
A
B
C