Home › Vehicle Interior › INTERIOR PANELS / TRIM › INSTRUMENT PANEL SAFETY PAD
RM3160E _58 Vehicle Interior _019716 INTERIOR PANELS / TRIM _0107106 INSTRUMENT PANEL SAFETY PAD A

INTERIOR PANELS / TRIM  INSTRUMENT PANEL SAFETY PAD  REASSEMBLY  


PROCEDURE

Hide 55328 1.INSTALL NO. 1 INSTRUMENT PANEL PIN

a.
B362367

Install the 2 No. 1 instrument panel pins with the 2 screws <D>.


Hide 55962 2.INSTALL NO. 2 SIDE DEFROSTER NOZZLE

a.
B362371

Engage the 2 claws to install the No. 2 side defroster nozzle.


Hide 55961B 3.INSTALL NO. 1 SIDE DEFROSTER NOZZLE

a.
B362372

Engage the 2 claws to install the No. 1 side defroster nozzle.


Hide 55349A 4.INSTALL INSTRUMENT PANEL CUSHION

a.

Install a new instrument panel cushion as shown in the illustration.

B362369
5.052,3.344 5.563,3.417 true 5.615,3.333 5.927,3.49 0.313,0.156 10 false *a 3.26,3.427 3.417,3.625 0.156,0.198 10 false A 6.802,2.781 6.958,2.979 0.156,0.198 10 false A
*a Outline - -


HINT:

Install the ends of the instrument panel cushion so that they are within the standard dimension (A) shown in the illustration.


Standard Dimension
Area Dimension
A 0 to 10 mm (0 to 0.394 in.)


Hide 55981 5.INSTALL NO. 1 DEFROSTER NOZZLE GARNISH

a.
B362368

Engage the 4 guides, 4 claws and 2 clips to install the No. 1 defroster nozzle garnish.


Hide 82144 6.INSTALL NO. 4 INSTRUMENT PANEL WIRE

a.
B362360

Engage the 12 clamps to install the No. 4 instrument panel wire.


Hide 89120A 7.INSTALL AUTOMATIC LIGHT CONTROL SENSOR

Hide 55837C 8.INSTALL CENTER HEATER TO REGISTER SUB DUCT

a.
B362359

Install the center heater to register sub duct with the 2 screws <D>.


Hide 73960A 9.INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

Hide 86860 10.INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)

Hide 86101 11.INSTALL ANTENNA CORD SUB-ASSEMBLY

Hide 55950G 12.INSTALL DEFROSTER NOZZLE ASSEMBLY

a.
B362358

Install the defroster nozzle assembly with the 3 screws <D>.


Hide 55972C 13.INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT

a.
B362357

Engage the 2 claws.


b.

Install the No. 2 side defroster nozzle duct with the screw <D>.


Hide 55846A 14.INSTALL NO. 4 HEATER TO REGISTER DUCT

a.
B362356

Install the No. 4 heater to register duct with the 3 screws <D>.


Hide 55971C 15.INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT

a.
B362355

Engage the 2 claws.


b.

Install the No. 1 side defroster nozzle duct with the screw <D>.


Hide 55843A 16.INSTALL NO. 1 HEATER TO REGISTER DUCT

a.
B362354

Install the No. 1 heater to register duct with the 3 screws <D>.