Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT PASSENGER AIRBAG ASSEMBLY
RM3160E _58 Vehicle Interior _019710 SUPPLEMENTAL RESTRAINT SYSTEMS _0109988 FRONT PASSENGER AIRBAG ASSEMBLY A

SUPPLEMENTAL RESTRAINT SYSTEMS  FRONT PASSENGER AIRBAG ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 82142A 1.INSTALL NO. 2 INSTRUMENT PANEL WIRE

a.
B355786
1.917,1.479 2.448,1.479 true 0.813,1.635 1.344,1.635 true 2.521,2.604 2.156,3.052 2.156,3.052 1.938,3.052 true 0.635,1.531 0.844,1.729 0.208,0.198 10 true *a 1.771,2.948 2.083,3.104 0.313,0.156 10 false *b 2.458,1.375 2.667,1.573 0.208,0.198 10 true *a
*a Airbag Connector
*b Airbag Connector Lock


Connect the 2 airbag connectors of the No. 2 instrument panel wire to the instrument panel passenger airbag assembly.

NOTICE:
·

When connecting any airbag connector, take care not to damage the airbag wire harness.

·

Be sure to only connect the connectors to each corresponding color.




b.

Push in the 2 airbag connector locks to install the 2 airbag connectors to the instrument panel passenger airbag assembly.


Hide 73960A 2.INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

a.

Engage the 3 hooks.


b.

Push in the instrument panel passenger airbag assembly to engage the 3 hooks.


c.

Install the instrument panel passenger airbag assembly with the 2 screws.


Hide 55846A 3.INSTALL NO. 4 HEATER TO REGISTER DUCT

Hide 4.INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

Hide 82142A 5.CONNECT NO. 2 INSTRUMENT PANEL WIRE

a.

Check that the ignition switch is off.


b.

Check that the cable is disconnected from the negative (-) battery terminal.

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.



c.
B355781

Connect the connector.

NOTICE:

When connecting any airbag connector, take care not to damage the airbag wire harness.



Hide 55434F 6.INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL