Home › Drivetrain › U660F AUTOMATIC TRANSMISSION / TRANSAXLE › AIR COOLED OIL COOLER › 2013.12–2016.11
RM3160E _52 Drivetrain _019726 U660F AUTOMATIC TRANSMISSION / TRANSAXLE _0107340 AIR COOLED OIL COOLER A

U660F AUTOMATIC TRANSMISSION / TRANSAXLE  AIR COOLED OIL COOLER  REMOVAL  


PROCEDURE

Hide 51441 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 53876A 2.SEPARATE FRONT FENDER LINER LH

Hide 53737B 3.REMOVE FRONT FENDER APRON SEAL LH

Hide 32917 5.REMOVE TRANSMISSION OIL COOLER AIR DUCT

a.
C296217

Remove the 2 bolts and transmission oil cooler air duct from the oil cooler assembly.


Hide 32910 6.REMOVE OIL COOLER ASSEMBLY

a.
C296218

Slide the 2 clips and disconnect the No. 1 oil cooler outlet hose and No. 3 transmission oil cooler hose from the oil cooler assembly.


b.
C296219

Remove the 2 nuts and oil cooler assembly from the oil cooler bracket.


Hide 32913 7.REMOVE OIL COOLER BRACKET

HINT:

Perform this procedure only when replacement of the oil cooler bracket is necessary.


a.
C296220

Remove the bolt, nut and oil cooler bracket from the body.