Home › Drivetrain › U660F AUTOMATIC TRANSMISSION / TRANSAXLE › TRANSMISSION CONTROL CABLE › 2013.12–2016.11
RM3160E _52 Drivetrain _019726 U660F AUTOMATIC TRANSMISSION / TRANSAXLE _0107343 TRANSMISSION CONTROL CABLE A

U660F AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  REMOVAL  


PROCEDURE

Hide 53299D 1.REMOVE RADIATOR SIDE DEFLECTOR SEAL LH

Hide 53298E 2.REMOVE RADIATOR SIDE SEAL RH

Hide 53295E 3.REMOVE COOL AIR INTAKE DUCT SEAL

Hide 17750A 4.REMOVE INLET AIR CLEANER ASSEMBLY

Hide 17705 5.REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

Hide 17801 6.REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

Hide 17701 7.REMOVE AIR CLEANER CASE SUB-ASSEMBLY

Hide 46410 9.DISCONNECT NO. 1 PARKING BRAKE CABLE ASSEMBLY (for RHD)

a.
C296268

Turn back the floor carpet.


b.
C296271

Remove 3 nuts and disconnect the No. 1 parking brake cable assembly.


Hide 33820B 10.REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

a.

Move the shift lever to N.


b.
C296234

Separate the end of the transmission control cable assembly from the transmission floor shift assembly.


c.
C296236C01
0.958,3.073 1.188,3.281 0.229,0.208 10 true *a
*a Counterclockwise


Rotate the nut counterclockwise approximately 180° and, while holding the nut in that position, separate the transmission control cable assembly from the transmission floor shift assembly.


d.
C239656

Disengage the wire harness clamp.


e.
C201710

Remove the nut from the transmission control shaft lever.


f.
C296586

Using a screwdriver, disengage the 4 claws and disconnect the transmission control cable assembly with the clip from the No. 1 transmission control cable bracket.


g.
C227713

Using a screwdriver, disengage the 2 claws and remove the clip from the transmission control cable assembly.


h.
C296261

Disconnect the transmission control cable assembly from the No. 3 transmission control cable bracket.


i.
C196199

Turn back the dash panel insulator.


j.

Remove the 3 bolts and pull out the transmission control cable assembly from the cabin.