If automatic transaxle parts are replaced, refer to Parts Replacement Compensation Table to determine if any additional operations are necessary.
Click hereDrivetrain>U660F AUTOMATIC TRANSMISSION / TRANSAXLE>AUTOMATIC TRANSAXLE SYSTEM>PRECAUTION
1. PRECAUTION
After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
53299D
3.REMOVE RADIATOR SIDE DEFLECTOR SEAL LH
53298E
4.REMOVE RADIATOR SIDE SEAL RH
53295E
5.REMOVE COOL AIR INTAKE DUCT SEAL
17750A
6.REMOVE INLET AIR CLEANER ASSEMBLY
17705
7.REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE
17801
8.REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
17701
9.REMOVE AIR CLEANER CASE SUB-ASSEMBLY
89530C
10.REMOVE TCM
Turn the lock lever and disconnect the TCM connector.
Remove the 2 bolts and TCM from the automatic transaxle assembly.