Home › Brake › PARKING BRAKE › PARKING BRAKE SYSTEM
RM3160E _54 Brake _019696 PARKING BRAKE _0107998 PARKING BRAKE SYSTEM N

PARKING BRAKE  PARKING BRAKE SYSTEM  ADJUSTMENT  


PROCEDURE

Hide 1.INSPECT PARKING BRAKE PEDAL TRAVEL

a.

Completely release the parking brake pedal.


b.

Fully depress the parking brake pedal to engage the parking brake.


c.

Depress the parking brake pedal again to disengage the parking brake.


d.
C233618

Slowly depress the parking brake pedal using the specified force, and count the number of clicks.

Parking Brake Pedal Travel:

8 to 11 notches at 300 N (31 kgf, 67.4 lbf)


If the parking brake pedal travel is not as specified, adjust the parking brake shoe clearance and parking brake pedal travel.


Hide 2.ADJUST PARKING BRAKE PEDAL TRAVEL (for LHD)

a.

Completely release the parking brake pedal.


b.

Remove the No. 1 instrument panel under cover sub-assembly.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>REMOVAL


c.
C293688
1.771,2.635 1.969,2.854 1.969,2.854 3.073,2.875 true 1.854,2.51 2.073,2.292 2.073,2.292 3.052,2.292 true 3.094,2.792 3.406,2.948 0.313,0.156 10 false *1 3.094,2.208 3.406,2.365 0.313,0.156 10 false *2
*1 Lock Nut
*2 No. 1 Wire Adjusting Nut


Loosen the lock nut and No. 1 wire adjusting nut to completely release the parking brake cable.


d.

Remove the rear wheels.


e.

Temporarily install the hub nuts to the hub bolts.

HINT:

Securely install the hub nuts to the rear disc.



f.

Remove the parking brake shoe adjusting hole plug.


g.
C239414
1.833,0.406 1.833,0.385 false
V100135

Expand
V100136

Contract


Turn the parking brake shoe adjuster and expand the shoes until the disc locks.


h.

Turn and contract the parking brake shoe adjuster until the rear disc can rotate smoothly.

Standard:

Returns 8 notches.



i.

Check that there is no brake drag against the shoe.


j.

Operate the parking brake pedal 3 to 4 times.


k.

Turn the No. 1 wire adjusting nut until the parking brake pedal travel is corrected to be within the specified range.

Parking Brake Pedal Travel:

8 to 11 notches at 300 N (31 kgf, 67.4 lbf)



l.

Using a wrench or an equivalent tool, hold the No. 1 wire adjusting nut and tighten the lock nut.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)


m.

Operate the parking brake pedal 3 to 4 times, and check the parking brake pedal travel.

Parking Brake Pedal Travel:

8 to 11 notches at 300 N (31 kgf, 67.4 lbf)



n.

Install the parking brake shoe adjusting hole plug.


o.

Check that the parking brake does not drag.


p.

Remove the hub nuts from the hub bolts.


q.

Install the rear wheels.

Torque:
103 N*m (1050 kgf*cm, 76 ft.*lbf)


r.

Install the No. 1 instrument panel under cover sub-assembly.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>INSTALLATION


Hide 3.ADJUST PARKING BRAKE PEDAL TRAVEL (for RHD)

a.

Completely release the parking brake pedal.


b.

Remove the No. 1 instrument panel under cover sub-assembly.

HINT:

Use the same procedure as for LHD.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>REMOVAL



c.
C294842

Slowly depress the parking brake pedal 1-click.


d.
C294843
3.031,2.635 2.031,2.635 2.031,2.635 1.688,2.344 true 1.792,2.25 1.958,2.135 1.958,2.135 3.01,2.135 true 3.073,2.542 3.385,2.698 0.313,0.156 10 false *1 3.073,2.052 3.385,2.208 0.313,0.156 10 false *2
*1 Lock Nut
*2 No. 1 Wire Adjusting Nut


Loosen the lock nut and No. 1 wire adjusting nut to completely release the parking brake cable.


e.

Remove the rear wheels.


f.

Temporarily install the hub nuts to the hub bolts.

HINT:

Securely install the hub nuts to the rear disc.



g.

Remove the parking brake shoe adjusting hole plug.


h.
C239414
1.833,0.406 1.833,0.385 false
V100135

Expand
V100136

Contract


Turn the parking brake shoe adjuster and expand the shoes until the disc locks.


i.

Turn and contract the parking brake shoe adjuster until the rear disc can rotate smoothly.

Standard:

Returns 8 notches.



j.

Check that there is no brake drag against the shoe.


k.

Operate the parking brake pedal 3 to 4 times.


l.

Turn the No. 1 wire adjusting nut until the parking brake pedal travel is corrected to be within the specified range.

Parking Brake Pedal Travel:

8 to 11 notches at 300 N (31 kgf, 67.4 lbf)



m.

Using a wrench or an equivalent tool, hold the No. 1 wire adjusting nut and tighten the lock nut.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)


n.

Operate the parking brake pedal 3 to 4 times, and check the parking brake pedal travel.

Parking Brake Pedal Travel:

8 to 11 notches at 300 N (31 kgf, 67.4 lbf)



o.

Install the parking brake shoe adjusting hole plug.


p.

Check that the parking brake does not drag.


q.

Remove the hub nuts from the hub bolts.


r.

Install the rear wheels.

Torque:
103 N*m (1050 kgf*cm, 76 ft.*lbf)


s.

Install the No. 1 instrument panel under cover sub-assembly.

HINT:

Use the same procedure as for LHD.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>INSTALLATION



Hide 4.INSPECT BRAKE WARNING LIGHT

a.

When operating the parking brake pedal, check that the brake warning light illuminates.

Standard:

The brake warning light always illuminates at the first click.