Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL(for LHD)
RM3160E _54 Brake _019693 BRAKE SYSTEM (OTHER) _0108086 BRAKE PEDAL(for LHD) A

BRAKE SYSTEM (OTHER)  BRAKE PEDAL(for LHD)  INSTALLATION  


PROCEDURE

Hide 47121 1.INSTALL BRAKE PEDAL PAD

a.

Install the brake pedal pad to the brake pedal support assembly.


Hide 47110 2.INSTALL BRAKE PEDAL SUPPORT ASSEMBLY

a.

Install the brake pedal support assembly with the 4 nuts.

Torque:
12.7 N*m (130 kgf*cm, 9 ft.*lbf)


b.

Install the brake pedal support assembly to the instrument panel reinforcement assembly with the 2 bolts.

Torque:
35 N*m (357 kgf*cm, 26 ft.*lbf)


c.

Connect the connector and engage the clamp.


Hide 47264A 3.INSTALL PUSH ROD PIN

a.
C283466
1.573,1.354 1.667,1.479 0.094,0.125 6 false '
V100144

Lithium Soap Base Glycol Grease


Apply lithium soap base glycol grease to the push rod pin.


b.
C292867

Connect the brake master cylinder push rod clevis to the brake pedal support assembly with the push rod pin, and install a new clip as shown in the illustration.

NOTICE:

Be sure to install the push rod pin in the correct direction.



Hide 47101A 4.INSTALL BRAKE PEDAL RETURN SPRING

a.
C292866
0,0 0,0 false
V100136

Front


Install the brake pedal return spring to the instrument panel reinforcement assembly and push rod pin as shown in the illustration.


Hide 84345 5.INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER

Hide 84340 6.INSTALL STOP LIGHT SWITCH ASSEMBLY

Hide 73900 7.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

Hide 8.INSPECT AND ADJUST BRAKE PEDAL