73350A
1.INSTALL REAR NO. 1 SEAT CENTER LAP TYPE BELT ASSEMBLY
Install the rear No. 1 seat center lap type belt assembly with the bolt and nut.
73373A
2.INSTALL REAR SEAT SHOULDER BELT COVER RH
Engage the 2 claws and guide as shown in the illustration to install the rear seat shoulder belt cover RH.
73117A
3.INSTALL BELT PROTECTOR
Wrap the seat belt webbing of the rear No. 1 seat center lap type belt assembly over the rear seat shoulder belt cover RH.
Engage the 4 claws as shown in the illustration to install the belt protector.
4.INSTALL REAR SEATBACK COVER WITH PAD
73373
5.INSTALL REAR SEAT SHOULDER BELT COVER
73178A
6.INSTALL SEAT BELT ANCHOR COVER CAP
71931B
7.INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY
71865
8.INSTALL REAR NO. 1 SEAT COVER BEZEL
72615A
9.INSTALL REAR SEATBACK LOCK STRIKER COVER
72593C
10.INSTALL NO. 2 RECLINING REMOTE CONTROL LEVER KNOB
71880A
11.INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY
72996
12.INSTALL REAR SEATBACK COVER RH
72996A
13.INSTALL REAR SEATBACK COVER
14.INSTALL REAR SEAT CUSHION COVER WITH PAD
15.CONNECT REAR SEAT CUSHION HEATER HARNESS (w/ Seat Heater System)
16.CONNECT REAR SEATBACK HEATER HARNESS (w/ Seat Heater System)
73350A
17.CONNECT REAR NO. 1 SEAT CENTER LAP TYPE BELT ASSEMBLY
| *a | Protruding Part |
Connect the anchor of the rear No. 1 seat center lap type belt assembly with the bolt.
Do not allow the anchor part of the rear No. 1 seat center lap type belt assembly to overlap the protruding part of the seatback frame.
71485B
18.INSTALL REAR SEAT HINGE COVER
72058A
19.INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY
72615H
20.INSTALL REAR NO. 1 SEATBACK LOCK STRIKER COVER
72525C
21.INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE
71845D
22.INSTALL REAR SEAT COVER CAP
72831B
23.INSTALL NO. 1 REAR SEAT CENTER ARMREST PLATE
72830
24.INSTALL REAR SEAT CENTER ARMREST ASSEMBLY
72868
25.INSTALL CENTER ARMREST HINGE COVER RH
73380D
26.INSTALL REAR SEAT INNER BELT ASSEMBLY
71828B
27.INSTALL REAR SEAT REAR CUSHION MOULDING RH
28.INSTALL REAR NO. 1 SEAT ASSEMBLY