Home › Vehicle Interior › METER / GAUGE / DISPLAY › CLOCK
RM3160E _58 Vehicle Interior _019708 METER / GAUGE / DISPLAY _0108489 CLOCK A

METER / GAUGE / DISPLAY  CLOCK  INSTALLATION  


PROCEDURE

Hide 83910 1.INSTALL CLOCK ASSEMBLY

a.

Connect the connector.


b.

Engage the 2 claws.


c.

Install the clock assembly with the 2 screws.


Hide 2.INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)

Hide 3.INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (for Navigation Receiver Type)

Hide 55680A 4.INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55670 5.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55422C 6.INSTALL CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL

Hide 7.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL WITH AIR CONDITIONING CONTROL ASSEMBLY

Hide 8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION