Home › Vehicle Interior › METER / GAUGE / DISPLAY › CLOCK
RM3160E _58 Vehicle Interior _019708 METER / GAUGE / DISPLAY _0108489 CLOCK A

METER / GAUGE / DISPLAY  CLOCK  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for Navigation Receiver Type)>PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 3.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL WITH AIR CONDITIONING CONTROL ASSEMBLY

Hide 55422C 4.REMOVE CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL

Hide 55670 5.REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55680A 6.REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 7.REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)

Hide 8.REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (for Navigation Receiver Type)

Hide 83910 9.REMOVE CLOCK ASSEMBLY

a.
E287785

Remove the 2 screws.


b.
E287786

Disengage the 2 claws.


c.
E287787

Disconnect the connector and remove the clock assembly.