Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR SPOILER
RM3160E _59 Vehicle Exterior _019724 EXTERIOR PANELS / TRIM _0109635 REAR SPOILER A

EXTERIOR PANELS / TRIM  REAR SPOILER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL REAR SPOILER SUB-ASSEMBLY

a.

Raise and lower the glass hatch and the back door respectively. Pass the wire harness into the vehicle and temporarily install the rear spoiler sub-assembly.


b.

Engage the 2 claws.


c.

Install the 6 bolts.


d.

Connect the wire harness.

i.

Connect the connector (for Glass Hatch Type).


ii.
B362514C01
1.615,1.458 1.979,1.823 true 2.031,1.74 2.25,1.938 0.219,0.198 10 true *a
*a Marking


Engage the grommet as shown in the illustration (for Glass Hatch Type).

HINT:

Install the grommet with its alignment mark facing down.



iii.

Connect the rear washer hose.


iv.

Connect the connector.


v.

Install the wire harness grommet to the wire harness.


vi.
B362512

Engage the 4 claws to install the wire harness.



Hide 76088B 2.INSTALL REAR SIDE SPOILER SUB-ASSEMBLY LH

a.

Engage the 3 claws.


b.

Install the rear side spoiler sub-assembly LH with the 2 bolts.


Hide 76087B 3.INSTALL REAR SIDE SPOILER SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 69806 4.INSTALL BACK DOOR GLASS GUIDE BRACKET SUB-ASSEMBLY (for Fixed Glass Type)

Hide 85110R 5.INSTALL REAR WIPER MOTOR ASSEMBLY (for Fixed Glass Type)