Use the same procedure for the RH side and LH side.
The procedure listed below is for the LH side.
48069
1.INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY
Install the front lower arm bushing stopper to the front lower No. 1 suspension arm sub-assembly.
Install the front lower No. 1 suspension arm sub-assembly to the front frame assembly with the 3 bolts and nut in the order shown in the illustration.
Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.
12372A
2.INSTALL ENGINE MOUNTING INSULATOR (When Not Using the Engine Support Bridge)
51100G
3.INSTALL FRONT FRAME ASSEMBLY
When Not Using the Engine Support Bridge: Click hereEngine / Hybrid System>2GR-FKS (ENGINE MECHANICAL)>ENGINE ASSEMBLY>INSTALLATION
When Using the Engine Support Bridge: Click hereSuspension>FRONT SUSPENSION>FRONT SUSPENSION MEMBER(When Using the Engine Support Bridge for 2GR-FKS)>INSTALLATION