Home › Steering › STEERING GEAR / LINKAGE › STEERING GEAR(When Using the Engine Support Bridge for AWD) › from 2016.11
RM3160E _55 Steering _019699 STEERING GEAR / LINKAGE _0295274 STEERING GEAR(When Using the Engine Support Bridge for AWD) A

STEERING GEAR / LINKAGE  STEERING GEAR(When Using the Engine Support Bridge for AWD)  REMOVAL  


PROCEDURE

Hide 1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

Hide 2. SECURE STEERING WHEEL

a.
C293547

Secure the steering wheel with the seat belt in order to prevent rotation.

HINT:

This operation is useful to prevent damage to the spiral cable.



Hide 3.REMOVE FRONT WHEELS

Hide 51442 4.REMOVE NO. 2 ENGINE UNDER COVER

Hide 45220 5.SEPARATE STEERING INTERMEDIATE SHAFT ASSEMBLY

a.
C293548C01
1.49,2.917 1.073,2.781 1.073,2.781 1.531,2.823 true 0.865,2.677 1.042,2.854 0.177,0.177 10 true *a
*a Matchmark


Put matchmarks on the steering intermediate shaft assembly and the steering link assembly.


b.

Remove the bolt and separate the steering intermediate shaft assembly from the steering link assembly.


Hide 45470 6.SEPARATE TIE ROD ASSEMBLY LH

a.
C293549

Remove the cotter pin and nut.


b.
C293550N01
2.24,1.438 2.427,1.438 2.427,1.438 2.427,1.188 false 1.969,1.354 2.427,1.552 0.458,0.198 10 false SST

Install SST to the tie rod assembly LH.

SST
09960-20010  (09961-02060)

NOTICE:

Make sure that the upper ends of the tie rod assembly LH and SST are aligned.



c.

Secure SST using a string.

NOTICE:

Be sure to tighten the string firmly to secure SST to the steering knuckle to prevent SST from falling off.



d.

Using SST, separate the tie rod assembly LH from the steering knuckle.

SST
09960-20010  (09961-02010)

C293551C01
0.417,1.417 0.729,1.417 true 0.427,2.281 0.615,2.281 0.615,2.281 0.729,2.521 false 3.802,3.354 3.802,3.083 false 0.229,1.323 0.417,1.49 0.188,0.167 10 true *a 6.635,2.292 6.844,2.469 0.208,0.177 10 true *b 6.646,2.896 6.854,3.073 0.208,0.177 10 true *b 6.521,0.708 6.729,0.885 0.208,0.177 10 true *c 4.438,3.469 4.646,3.646 0.208,0.177 10 true *d 0.281,2.188 0.49,2.365 0.208,0.177 10 true *e 1.5,2.594 1.708,2.771 0.208,0.177 10 true A 1.5,2.823 1.708,3 0.208,0.177 10 true B 3.688,3.365 4.177,3.604 0.49,0.24 10 true SST
*a String *b Molybdenum grease application area
*c Place wrench here *d Turn
*e Center Nut - -


CAUTION:

Apply molybdenum grease to the bolt threads and the tip of SST.


NOTICE:
·

Be sure to tighten the string firmly to secure SST to the steering knuckle to prevent SST from falling off.

·

Install SST with the center nut so that (A) and (B) shown in the illustration are parallel. Otherwise, the ball joint dust cover may be damaged.

·

Be sure to place the wrench on the part indicated in the illustration.

·

Do not damage the front disc brake dust cover sub-assembly.

·

Do not damage the ball joint dust cover.

·

Do not damage the steering knuckle.




Hide 45460 7.SEPARATE TIE ROD ASSEMBLY RH

HINT:

Perform the same procedure as for the LH side.


Hide 48810 8.SEPARATE FRONT STABILIZER LINK ASSEMBLY LH

Hide 48820B 9.SEPARATE FRONT STABILIZER LINK ASSEMBLY RH

HINT:

Perform the same procedure as for the LH side.


Hide 48824A 11.REMOVE FRONT NO. 1 STABILIZER BRACKET RH

HINT:

Perform the same procedure as for the LH side.


Hide 12.SEPARATE FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY

a.

Separate the front stabilizer bar with front stabilizer link assembly from the front frame assembly.

NOTICE:

Use wire or an equivalent tool to secure the front stabilizer bar with front stabilizer link assembly.



Hide 13.SEPARATE STEERING LINK ASSEMBLY

a.
C368353

Remove the 2 bolts, 2 nuts and separate the steering link assembly from the front frame assembly.

NOTICE:
·

Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.

·

Use wire or an equivalent tool to secure the steering link assembly.




Hide 15.REMOVE STEERING LINK ASSEMBLY

a.

Remove the steering link assembly from the vehicle body.


Hide 16.SECURE STEERING LINK ASSEMBLY

a.
C238516C05
1.448,1.042 1.677,1.271 1.677,1.271 1.865,1.271 false 1.167,0.729 1.167,0.396 1.167,0.396 0.573,0.396 false 1.906,1.177 2.198,1.406 0.292,0.229 10 false *a 0.281,0.323 0.823,0.625 0.542,0.302 10 false SST
*a Protective Tape


Using SST, secure the steering link assembly in a vise.

SST
09612-00012  

HINT:

Tape SST before use.



Hide 45470 17.REMOVE TIE ROD ASSEMBLY LH

a.
C238518C04
1.24,1.042 1.24,1.563 true 1.021,1.042 1.021,1.26 1.021,1.26 1.24,1.26 true 1.156,1.573 1.313,1.719 0.156,0.146 10 *a
*a Matchmark


Put matchmarks on the tie rod assembly LH and steering gear assembly.


b.

Remove the tie rod assembly LH and lock nut.


Hide 45460 18.REMOVE TIE ROD ASSEMBLY RH

HINT:

Perform the same procedure as for the LH side.