Home › Engine / Hybrid System › 2GR-FKS FUEL › FUEL MAIN VALVE › from 2016.11
RM3160E _51 Engine / Hybrid System _060158 2GR-FKS FUEL _0298780 FUEL MAIN VALVE A

2GR-FKS FUEL  FUEL MAIN VALVE  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:
A368838C01
1.865,0.813 2.292,0.813 true 2.344,0.729 2.656,0.885 0.313,0.156 10 false *a
*a Tube


·

Do not disconnect the tube shown in the illustration when disassembling the fuel suction tube with pump and gauge assembly. Doing so will cause reassembly of the fuel suction tube with pump and gauge assembly to be impossible as the tube is pressed into the fuel suction plate sub-assembly.

·

When replacing the fuel filter, replace it together with the fuel suction plate sub-assembly.



PROCEDURE

Hide 1.REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

Hide 83320 2.REMOVE FUEL SENDER GAUGE ASSEMBLY

Hide 77024A 3.REMOVE FUEL SUCTION PLATE SUB-ASSEMBLY

Hide 23217D 4.REMOVE FUEL PUMP FILTER

Hide 23070 5.REMOVE FUEL MAIN VALVE ASSEMBLY

a.
A368879

Remove the fuel main valve assembly (for Low Pressure).

i.

Remove the clip from the fuel filter.


ii.
A368880C01
1.729,0.854 1.896,0.385 1.896,0.385 2.063,0.385 true 2.104,0.302 2.271,0.479 0.167,0.177 10 true *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, remove the fuel main valve assembly from the fuel filter.

NOTICE:
·

Pull out the fuel main valve assembly carefully because the O-rings are firmly installed between the fuel main valve assembly and fuel filter.

·

Do not damage the fuel filter.




iii.
A097616C10
0.875,0.969 0.875,0.5 false 0.667,0.5 1.833,0.5 1.833,0.5 1.833,0.729 false 0.469,0.427 0.75,0.604 0.281,0.177 10 false *1
*1 O-ring


Remove the 2 O-rings from the fuel main valve assembly.



b.
A368881

Remove the fuel main valve assembly (for High Pressure).

i.

Remove the clip from the fuel filter.


ii.
A368882C01
2.5,1.438 2.323,1.438 2.323,1.438 1.896,1.021 true 2.542,1.354 2.854,1.51 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, remove the fuel main valve assembly from the fuel filter.

NOTICE:
·

Pull out the fuel main valve assembly carefully because the O-rings are firmly installed between the fuel main valve assembly and fuel filter.

·

Do not damage the fuel filter.




iii.
A097616C10
0.875,0.969 0.875,0.5 false 0.667,0.5 1.833,0.5 1.833,0.5 1.833,0.729 false 0.469,0.427 0.75,0.604 0.281,0.177 10 false *1
*1 O-ring


Remove the 2 O-rings from the fuel main valve assembly.