1.REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
2.DRAIN FUEL
51206A
3.REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY (for 2WD)
51206A
4.REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY (for AWD)
58167A
5.REMOVE FRONT CENTER FLOOR COVER
|
Screw |
|
Nut |
Remove the 2 screws and nut.
Disengage the 4 clips to remove the front center floor cover.
77765
6.REMOVE CHARCOAL CANISTER PROTECTOR
77606
7.REMOVE NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY
Remove the 4 clips, 7 nuts and No. 1 fuel tank protector sub-assembly.
77209F
8.DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY
Disconnect the fuel tank main tube sub-assembly from the fuel pipe.
Click hereEngine / Hybrid System>2GR-FKS FUEL>FUEL SYSTEM>PRECAUTION
9.DISCONNECT FUEL TANK BREATHER TUBE
Loosen the clamp, then disconnect the fuel tank breather tube from the fuel tank filler pipe assembly.
77213B
10.DISCONNECT FUEL TANK TO FILLER PIPE HOSE
Loosen the clamp, then disconnect the fuel tank to filler pipe hose from the fuel tank filler pipe assembly.
77100
11.REMOVE FUEL TANK ASSEMBLY
Disconnect the fuel cut off valve with tube assembly from the charcoal canister assembly.
Click hereEngine / Hybrid System>2GR-FKS FUEL>FUEL SYSTEM>PRECAUTION
Remove the bolt, nut and rear fuel tank bracket LH.
Remove the nut.
Support the fuel tank assembly using an engine lifter.
Using height adjustment attachments and plate lift attachments, keep the fuel tank assembly horizontal.
Remove the 4 bolts, No. 1 fuel tank band sub-assembly LH and No. 1 fuel tank band sub-assembly RH.
Lower the engine lifter to remove the fuel tank assembly.
Be careful not to drop the fuel tank assembly.
When removing the fuel tank assembly, tilt it slightly to prevent it from interfering with the surrounding parts.
77113B
12.REMOVE FUEL TANK SIDE PLATE
| *1 | Fuel Tank Band Pin |
| *2 | Fuel Tank Cushion |
Remove the fuel tank band pin, fuel tank cushion and fuel tank side plate from the fuel tank assembly.
77209F
13.REMOVE FUEL TANK MAIN TUBE SUB-ASSEMBLY
| *1 | Fuel Tank Main Tube Sub-assembly |
Disengage the 3 claws to remove the fuel tank main tube sub-assembly from the fuel tank assembly.
77213B
14.REMOVE FUEL TANK TO FILLER PIPE HOSE
Loosen the clamp, then remove the fuel tank to filler pipe hose from the fuel tank assembly.
77608C
15.REMOVE FUEL TANK CUSHION SET
| *1 | Fuel Tank Cushion Set |
| *2 | No. 5 Fuel Tank Cushion |
Remove the 2 fuel tank cushion sets and 2 No. 5 fuel tank cushions from the fuel tank assembly.
77158A
16.REMOVE TANK SUCTION TUBE SUPPORT
Remove the tank suction tube support from the fuel tank assembly.