Home › Power Source / Network › NETWORKING › NETWORK GATEWAY ECU › from 2016.11
RM3160E _57 Power Source / Network _019704 NETWORKING _0095664 NETWORK GATEWAY ECU A

NETWORKING  NETWORK GATEWAY ECU  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:
·

When disassembling the central gateway ECU (network gateway ECU), eliminate static electricity by touching the vehicle body to prevent the components from being damaged.

·

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION



PROCEDURE

Hide 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 82877 2.REMOVE ECU INTEGRATION BOX RH (for LHD)

Hide 82878 3.REMOVE ECU INTEGRATION BOX LH (for RHD)

Hide 89111 4.REMOVE CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (for LHD)

a.
C294438

Disengage the 2 claws and remove the central gateway ECU (network gateway ECU).


Hide 89111 5.REMOVE CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (for RHD)

a.
C297211

Disengage the 2 claws and remove the central gateway ECU (network gateway ECU).