Home › Engine / Hybrid System › 2GR-FKS (INTAKE / EXHAUST) › INTAKE AIR CONTROL VALVE(for ACIS) › from 2016.11
RM3160E _51 Engine / Hybrid System _060160 2GR-FKS INTAKE / EXHAUST _0299813 INTAKE AIR CONTROL VALVE(for ACIS) G

2GR-FKS INTAKE / EXHAUST  INTAKE AIR CONTROL VALVE(for ACIS)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT INTAKE AIR CONTROL VALVE (for ACIS)

a.

Remove the V-bank cover sub-assembly.

Click hereEngine / Hybrid System>2GR-FKS (ENGINE MECHANICAL)>ENGINE ASSEMBLY>REMOVAL


b.
A395754

Disconnect the vacuum hose sub-assembly from the intake air control valve (for ACIS).


c.

Connect a hose and vacuum pump to the intake air control valve (for ACIS).


d.
A395755C01
0.875,2.594 0.875,3.01 true 0.802,3 1.042,3.208 0.24,0.208 10 true *a
*a Actuator Rod


Using the vacuum pump, apply a vacuum to the intake air control valve (for ACIS). Check that the actuator rod operates when vacuum is applied.

If the actuator rod does not operate when vacuum is applied, replace the intake air surge tank assembly.


e.

Using the vacuum pump, apply a vacuum to the intake air control valve (for ACIS). Check that there is no change in vacuum after 1 minute.

If the operation is not as specified, replace the intake air surge tank assembly.


f.

Disconnect the hose and vacuum pump from the intake air control valve (for ACIS).


g.

Connect the vacuum hose sub-assembly to the intake air control valve (for ACIS).


h.