11209
1.REMOVE V-BANK COVER SUB-ASSEMBLY
89467C
2.REMOVE AIR FUEL RATIO SENSOR (for Bank 2)
Disengage the 2 wire harness clamps.
Disconnect the air fuel ratio sensor connector.
Using SST, remove the air fuel ratio sensor from the exhaust manifold assembly LH (TWC: Front Catalyst).
If the air fuel ratio sensor has been struck or dropped, replace it.
51442
3.REMOVE NO. 2 ENGINE UNDER COVER (for LHD)
17141
4.REMOVE EXHAUST MANIFOLD (TWC: Front Catalyst) (for RHD)
89467B
5.REMOVE AIR FUEL RATIO SENSOR (for Bank 1)
for LHD
Disconnect the air fuel ratio sensor connector.
Disengage the 3 wire harness clamps.
Using SST, remove the air fuel ratio sensor from the exhaust manifold (TWC: Front Catalyst).
If the air fuel ratio sensor has been struck or dropped, replace it.
for RHD
Using SST, remove the air fuel ratio sensor from the exhaust manifold (TWC: Front Catalyst).
If the air fuel ratio sensor has been struck or dropped, replace it.