Home › Engine / Hybrid System › 2GR-FKS (ENGINE CONTROL) › HEATED OXYGEN SENSOR(for Bank 1) › from 2016.11
RM3160E _51 Engine / Hybrid System _060156 2GR-FKS ENGINE CONTROL _0303263 HEATED OXYGEN SENSOR(for Bank 1) A

2GR-FKS ENGINE CONTROL  HEATED OXYGEN SENSOR(for Bank 1)  REMOVAL  


PROCEDURE

Hide 51442 2.REMOVE NO. 2 ENGINE UNDER COVER

Hide 89465 3.REMOVE HEATED OXYGEN SENSOR (for 2WD)

a.
A394318C01
2.406,2.938 2.406,2.583 false 2.354,2.948 2.667,3.104 0.313,0.156 10 false *1
*1 Wire Harness Clamp Bracket


Disconnect the heated oxygen sensor connector.


b.

Disengage the 3 wire harness clamps.


c.

Remove the wire harness clamp bracket from the heated oxygen sensor.


d.
A394319N01
2.521,1.156 2.521,0.667 true 2.417,1.167 2.875,1.365 0.458,0.198 10 true SST

Using SST, remove the heated oxygen sensor from the front No. 3 exhaust pipe sub-assembly.

SST
09224-00012  

NOTICE:

If the heated oxygen sensor has been struck or dropped, replace it.



Hide 17403 4.REMOVE FRONT NO. 3 EXHAUST PIPE SUB-ASSEMBLY (for AWD)

Hide 89465 5.REMOVE HEATED OXYGEN SENSOR (for AWD)

a.
A369388

Remove the wire harness clamp bracket from the heated oxygen sensor.


b.
A369389N01
0.542,0.802 0.771,0.802 0.771,0.802 0.823,1.042 true 0.219,0.719 0.542,0.917 0.323,0.198 10 false SST

Using SST, remove the heated oxygen sensor from the front No. 3 exhaust pipe sub-assembly.

SST
09224-00012  

NOTICE:

If the heated oxygen sensor has been struck or dropped, replace it.