1. PRECAUTION
After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
83100
3.REMOVE COMBINATION METER ASSEMBLY (for LHD)
67914
4.REMOVE FRONT DOOR SCUFF PLATE LH (for LHD)
62112A
5.REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (for LHD)
6.DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH (for LHD)
55436A
7.REMOVE INSTRUMENT PANEL FINISH PANEL END LH (for LHD)
55606
8.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)
53601
9.DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (for LHD)
55045
10.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for LHD)
11.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL WITH AIR CONDITIONING CONTROL ASSEMBLY (for LHD)
12.REMOVE CONSOLE BOX ASSEMBLY (for LHD)
55446E
13.REMOVE NO. 2 SWITCH HOLE BASE (for LHD)
58817A
14.REMOVE FRONT NO. 2 CONSOLE BOX INSERT (for LHD)
58816B
15.REMOVE CONSOLE BOX INSERT (for LHD)
67913
16.REMOVE FRONT DOOR SCUFF PLATE RH (for LHD)
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>REMOVAL
62111A
17.REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (for LHD)
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>REMOVAL
18.DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for LHD)
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>REMOVAL
55435A
19.REMOVE INSTRUMENT PANEL FINISH PANEL END RH (for LHD)
55607
20.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)
21.REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for LHD)
55471A
22.REMOVE INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)
55414A
23.REMOVE INSTRUMENT CLUSTER FINISH PANEL END (for LHD)
55445B
24.REMOVE INSTRUMENT PANEL FINISH PLATE (for LHD)
55446A
25.REMOVE NO. 1 SWITCH HOLE BASE (for LHD)
89611
26.REMOVE ENGINE SWITCH (for LHD)
Disengage the 2 claws and remove the engine switch from the No. 1 switch hole base.
67913
27.REMOVE FRONT DOOR SCUFF PLATE RH (for RHD)
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>REMOVAL
62111A
28.REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (for RHD)
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>REMOVAL
29.DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for RHD)
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>REMOVAL
55435A
30.REMOVE INSTRUMENT PANEL FINISH PANEL END RH (for RHD)
55606
31.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)
53601
32.DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (for RHD)
55045
33.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for RHD)
89611
34.REMOVE ENGINE SWITCH (for RHD)
Disengage the 2 claws and remove the engine switch from the lower instrument panel finish panel sub-assembly.