Home › Drivetrain › UA80F (AUTOMATIC TRANSMISSION / TRANSAXLE) › TRANSMISSION CONTROL CABLE › from 2016.11
RM3160E _52 Drivetrain _060165 UA80F AUTOMATIC TRANSMISSION / TRANSAXLE _0303761 TRANSMISSION CONTROL CABLE A

UA80F AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  REMOVAL  


PROCEDURE

Hide 17705 1.REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

Hide 17801 2.REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

Hide 46410 5.DISCONNECT NO. 1 PARKING BRAKE CABLE ASSEMBLY (for RHD)

a.
C296268

Turn back the floor carpet.


b.
C296271

Remove 3 nuts and disconnect the No. 1 parking brake cable assembly.


Hide 33820B 6.REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

a.

Move the shift lever to N.


b.
C296234

Separate the transmission control cable assembly from the transmission floor shift assembly.


c.
C296236C01
0.958,3.073 1.188,3.281 0.229,0.208 10 true *a
*a Counterclockwise


Rotate the nut counterclockwise approximately 180° and, while holding the nut in that position, separate the transmission control cable assembly from the transmission floor shift assembly.


d.
C366767

Remove the clip from the transmission control shaft lever as shown in the illustration.


e.
C366768

Using a screwdriver, disengage the 4 claws and disconnect the transmission control cable assembly with the clip from the No. 1 transmission control cable bracket.


f.
C227713

Using a screwdriver, disengage the 2 claws and disconnect the clip from the transmission control cable assembly.


g.
C366769

Disengage the transmission control cable assembly from the No. 3 transmission control cable bracket.


h.
C196199

Turn back the dash panel insulator.


i.

Remove the 3 bolts and pull out the transmission control cable assembly from the cabin.