Home › Drivetrain › UA80F (AUTOMATIC TRANSMISSION / TRANSAXLE) › TRANSMISSION CONTROL CABLE › from 2016.11
RM3160E _52 Drivetrain _060165 UA80F AUTOMATIC TRANSMISSION / TRANSAXLE _0303761 TRANSMISSION CONTROL CABLE N

UA80F AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  ADJUSTMENT  


CAUTION / NOTICE / HINT

NOTICE:

Before adjusting the transmission control cable assembly, check that the park/neutral position switch assembly and shift lever are in neutral.


PROCEDURE

Hide 55446E 2.REMOVE NO. 2 SWITCH HOLE BASE

Hide 58817A 3.REMOVE FRONT NO. 2 CONSOLE BOX INSERT

Hide 4.ADJUST SHIFT LEVER POSITION

a.
C296234

Separate the transmission control cable assembly from the transmission floor shift assembly.


b.
C296236C01
0.958,3.073 1.188,3.281 0.229,0.208 10 true *a
*a Counterclockwise


Rotate the nut counterclockwise approximately 180° and, while holding the nut in that position, separate the transmission control cable assembly from the transmission floor shift assembly.


c.
C194520C31
2.271,2.573 2.615,2.573 false 1.948,1.75 2.083,1.531 2.083,1.531 2.188,1.531 false 1.594,0.958 1.781,1.135 0.188,0.177 10 false *c 1.792,1.344 1.979,1.521 0.188,0.177 10 false *c 2.438,0.781 2.625,0.958 0.188,0.177 10 false *d 2.25,1.458 2.51,1.656 0.26,0.198 10 false *a 2.229,2.313 2.417,2.49 0.188,0.177 10 false *d 2.656,2.49 2.958,2.729 0.302,0.24 10 false *b
*a Slider
*b Lock Piece
*c Slide
*d Pull


Slide the slider of the transmission control cable assembly in the direction indicated by the arrow in the illustration, and pull the lock piece outward.


d.
C163770C01
2.323,1 2.885,2.26 2.885,2.26 2.313,3.25 false 1.74,1.042 0.802,0.635 0.802,0.635 0.625,0.635 false 1.75,3.271 0.802,2.865 0.802,2.865 0.625,2.865 false 0.448,0.542 0.604,0.729 0.156,0.188 10 false *a 2.344,0.417 2.563,0.583 0.219,0.167 10 false *b 0.458,2.781 0.615,2.969 0.156,0.188 10 false *a 2.927,2.177 3.146,2.344 0.219,0.167 10 false *c
*a Lock Nut
*b Push in
*c Stopper


Turn the lock nut of the transmission control cable assembly counterclockwise. While holding the lock nut, push in the stopper.


e.
C296240C01
1.656,0.563 1.802,0.25 1.802,0.25 1.906,0.25 false 1.958,0.177 2.26,0.427 0.302,0.25 10 false *a 0.969,0.646 1.177,0.865 0.208,0.219 10 false A 2.365,0.646 2.594,0.896 0.229,0.25 10 false A
*a Stopper


Install the transmission control cable assembly to the transmission floor shift assembly.

NOTICE:

After installation, check that the outer part of the stopper is protruding beyond portion A-A as shown in the illustration.



f.
C296260C01
1.083,2.635 1.198,2.635 1.198,2.635 1.323,2.781 false 2.115,2.688 2,2.688 2,2.688 1.917,2.885 false 0.896,2.552 1.208,2.771 0.313,0.219 10 false *a 2.146,2.615 2.521,2.854 0.375,0.24 10 false *b
*a Lock Piece
*b Adjuster Case


Install the transmission control cable assembly to the transmission floor shift assembly.

NOTICE:
·

Check that the lock piece is pulled out.

·

Install the cable end all the way to the base of the transmission floor shift assembly pin.




g.
C296262

Push the lock piece into the adjuster case.

NOTICE:
·

Check that the park/neutral position switch assembly and shift lever are in neutral.

·

Securely push in the lock piece until the slider lock is engaged.




h.

After adjusting the shift lever position, check the operation and function of the shift lever. If there is a problem, adjust the shift lever position again.


Hide 58817A 5.INSTALL FRONT NO. 2 CONSOLE BOX INSERT