Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on Front Door Windows) › from 2018.09
RM3160E _59 Vehicle Exterior _019717 WINDOW / GLASS _0106114 POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on Front Door Windows) U

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on Front Door Windows)  TERMINALS OF ECU  


CHECK POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY


B164269E39
3.427,0.104 3.792,0.313 0.365,0.208 3.521,0.125 3.875,0.292 0.354,0.167 10 false H6

a.

Disconnect the H6 power window regulator master switch assembly connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connector disconnected.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
H6-3 (B) - H6-1 (GND) GR - W-B Power supply Always 11 to 14 V
H6-13 (PWS) - H6-1 (GND) BE - W-B Power supply Ignition switch ON 11 to 14 V
H6-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω


c.

Reconnect the H6 power window regulator master switch assembly connector.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
H6-5 (DOWN) - H6-1 (GND) V - W-B Power window motor down output Ignition switch ON, driver door power window regulator switch not pushed or pulled 11 to 14 V
H6-5 (DOWN) - H6-1 (GND) V - W-B Power window motor down output Ignition switch ON, driver door power window moving, driver door power window regulator switch pushed halfway down (Manual operation) Below 1 V
H6-4 (UP) - H6-1 (GND) L - W-B Power window motor up output Ignition switch ON, driver door power window regulator switch not pushed or pulled 11 to 14 V
H6-4 (UP) - H6-1 (GND) L - W-B Power window motor up output Ignition switch ON, driver door power window moving, driver door power window regulator switch pulled halfway up (Manual operation) Below 1 V
H6-12 (RLU) - H6-1 (GND) Y - W-B Power window motor up output Ignition switch ON, rear LH door power window regulator switch off Below 1 V
H6-12 (RLU) - H6-1 (GND) Y - W-B Power window motor up output Ignition switch ON, rear LH door power window regulator switch up (Manual operation) 11 to 14 V
H6-15 (RLD) - H6-1 (GND) W - W-B Power window motor down output Ignition switch ON, rear LH door power window regulator switch off Below 1 V
H6-15 (RLD) - H6-1 (GND) W - W-B Power window motor down output Ignition switch ON, rear LH door power window regulator switch down (Manual operation) 11 to 14 V
H6-10 (RRU) - H6-1 (GND) SB - W-B Power window motor up output Ignition switch ON, rear RH door power window regulator switch off Below 1 V
H6-10 (RRU) - H6-1 (GND) SB - W-B Power window motor up output Ignition switch ON, rear RH door power window regulator switch up (Manual operation) 11 to 14 V
H6-16 (RRD) - H6-1 (GND) LG - W-B Power window motor down output Ignition switch ON, rear RH door power window regulator switch off Below 1 V
H6-16 (RRD) - H6-1 (GND) LG - W-B Power window motor down output Ignition switch ON, rear RH door power window regulator switch down (Manual operation) 11 to 14 V



CHECK POWER WINDOW REGULATOR SWITCH ASSEMBLY


B351350E01
3.375,0.281 3.76,0.521 0.385,0.24 3.51,0.323 3.823,0.521 0.313,0.198 10 false I8

a.

Disconnect the I8 power window regulator switch assembly connector.


b.

Measure the resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connector disconnected.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
I8-7 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω


c.

Reconnect the I8 power window regulator switch assembly connector.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
I8-2 (IG) - I8-7 (GND) LG - W-B IG power supply Ignition switch ON 11 to 14 V
I8-2 (IG) - I8-7 (GND) LG - W-B IG power supply Ignition switch off Below 1 V
I8-5 (UP) - I8-7 (GND) L - W-B Power window motor up output Ignition switch ON, power window regulator switch assembly not pushed or pulled 11 to 14 V
I8-5 (UP) - I8-7 (GND) L - W-B Power window motor up output Ignition switch ON, front passenger door power window moving, power window regulator switch assembly pulled halfway up (Manual operation) Below 1 V
I8-5 (UP) - I8-7 (GND) L - W-B Power window motor up output Ignition switch ON, front passenger door power window fully open 11 to 14 V
I8-5 (UP) - I8-7 (GND) L - W-B Power window motor up output Ignition switch ON, front passenger door power window moving, power window regulator switch assembly fully pulled up (Auto operation) Below 1 V
I8-5 (UP) - I8-7 (GND) L - W-B Power window motor up output Ignition switch ON, front passenger door power window fully closed 11 to 14 V
I8-4 (DOWN) - I8-7 (GND) V - W-B Power window motor down output Ignition switch ON, power window regulator switch assembly not pushed or pulled 11 to 14 V
I8-4 (DOWN) - I8-7 (GND) V - W-B Power window motor down output Ignition switch ON, front passenger door power window moving, power window regulator switch assembly pushed halfway down (Manual operation) Below 1 V
I8-4 (DOWN) - I8-7 (GND) V - W-B Power window motor down output Ignition switch ON, front passenger door power window fully closed 11 to 14 V
I8-4 (DOWN) - I8-7 (GND) V - W-B Power window motor down output Ignition switch ON, front passenger door power window moving, power window regulator switch assembly fully pushed down (Auto operation) Below 1 V
I8-4 (DOWN) - I8-7 (GND) V - W-B Power window motor down output Ignition switch ON, front passenger door power window fully open 11 to 14 V
I8-8 (AUTO) - I8-7 (GND) B - W-B Power window motor auto up output Ignition switch ON, front passenger door power window fully open 11 to 14 V
I8-8 (AUTO) - I8-7 (GND) B - W-B Power window motor auto up output Ignition switch ON, front passenger door power window moving, power window regulator switch assembly fully pulled up (Auto operation) Below 1 V
I8-8 (AUTO) - I8-7 (GND) B - W-B Power window motor auto up output Ignition switch ON, front passenger door power window fully closed 11 to 14 V
I8-8 (AUTO) - I8-7 (GND) B - W-B Power window motor auto down output Ignition switch ON, front passenger door power window fully closed 11 to 14 V
I8-8 (AUTO) - I8-7 (GND) B - W-B Power window motor auto down output Ignition switch ON, front passenger door power window moving, power window regulator switch assembly fully pushed down (Auto operation) Below 1 V
I8-8 (AUTO) - I8-7 (GND) B - W-B Power window motor auto down output Ignition switch ON, front passenger door power window fully open 11 to 14 V



CHECK REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (FOR LH DOOR)


B351351N03
3.375,0.125 3.813,0.375 0.438,0.25 3.51,0.156 3.823,0.354 0.313,0.198 10 false K5

a.

Disconnect the K5 rear power window regulator switch assembly (for LH door) connector.


b.

Measure the voltage according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connector disconnected.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
K5-2 (B) - Body ground LA-G - Body ground Power supply Ignition switch ON 11 to 14 V


c.

Reconnect the K5 rear power window regulator switch assembly (for LH door) connector.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
K5-7 (U) - Body ground LA-L - Body ground Power window motor up output Ignition switch ON, rear power window regulator switch assembly (for LH door) off Below 1 V
K5-7 (U) - Body ground LA-L - Body ground Power window motor up output Ignition switch ON, rear power window regulator switch assembly (for LH door) up (Manual operation) 11 to 14 V
K5-1 (D) - Body ground LA-Y - Body ground Power window motor down output Ignition switch ON, rear power window regulator switch assembly (for LH door) off Below 1 V
K5-1 (D) - Body ground LA-Y - Body ground Power window motor down output Ignition switch ON, rear power window regulator switch assembly (for LH door) down (Manual operation) 11 to 14 V



CHECK REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (FOR RH DOOR)


B351351N04
3.375,0.125 3.781,0.385 0.406,0.26 3.51,0.167 3.823,0.365 0.313,0.198 10 false J5

a.

Disconnect the J5 rear power window regulator switch assembly (for RH door) connector.


b.

Measure the voltage according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connector disconnected.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
J5-2 (B) - Body ground LA-B - Body ground Power supply Ignition switch ON 11 to 14 V


c.

Reconnect the J5 rear power window regulator switch assembly (for RH door) connector.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
J5-7 (U) - Body ground LA-R - Body ground Power window motor up output Ignition switch ON, rear power window regulator switch assembly (for RH door) off Below 1 V
J5-7 (U) - Body ground LA-R - Body ground Power window motor up output Ignition switch ON, rear power window regulator switch assembly (for RH door) up (Manual operation) 11 to 14 V
J5-1 (D) - Body ground LA-Y - Body ground Power window motor down output Ignition switch ON, rear power window regulator switch assembly (for RH door) off Below 1 V
J5-1 (D) - Body ground LA-Y - Body ground Power window motor down output Ignition switch ON, rear power window regulator switch assembly (for RH door) down (Manual operation) 11 to 14 V



CHECK POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR DRIVER DOOR)


B280976E29
2.344,0.74 2.74,0.979 0.396,0.24 2.458,0.781 2.729,0.958 0.271,0.177 10 false H4

a.

Disconnect the H4 power window regulator motor assembly (for driver door) connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connector disconnected.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
H4-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
H4-2 (B) - Body ground L - Body ground Power supply Always 11 to 14 V


c.

Reconnect the H4 power window regulator motor assembly (for driver door) connector.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
H4-7 (DOWN) - H4-1 (GND) V - W-B Power window motor down input Ignition switch ON, power window regulator master switch assembly (driver door power window regulator switch) not pushed or pulled 11 to 14 V
H4-7 (DOWN) - H4-1 (GND) V - W-B Power window motor down input Ignition switch ON, driver door power window moving, power window regulator master switch assembly (driver door power window regulator switch) pushed halfway down (Manual operation) Below 1 V
H4-7 (DOWN) - H4-1 (GND) V - W-B Power window motor down input Ignition switch ON, driver door power window fully closed 11 to 14 V
H4-7 (DOWN) - H4-1 (GND) V - W-B Power window motor down input Ignition switch ON, driver door power window moving, power window regulator master switch assembly (driver door power window regulator switch) fully pushed down (Auto operation) Below 1 V
H4-7 (DOWN) - H4-1 (GND) V - W-B Power window motor down input Ignition switch ON, driver door power window fully open 11 to 14 V
H4-10 (UP) - H4-1 (GND) L - W-B Power window motor up input Ignition switch ON, power window regulator master switch assembly (driver door power window regulator switch) not pushed or pulled 11 to 14 V
H4-10 (UP) - H4-1 (GND) L - W-B Power window motor up input Ignition switch ON, driver door power window moving, power window regulator master switch assembly (driver door power window regulator switch) pulled halfway up (Manual operation) Below 1 V
H4-10 (UP) - H4-1 (GND) L - W-B Power window motor up input Ignition switch ON, power window regulator master switch assembly (driver door power window regulator switch) fully open 11 to 14 V
H4-10 (UP) - H4-1 (GND) L - W-B Power window motor up input Ignition switch ON, driver door power window moving, power window regulator master switch assembly (driver door power window regulator switch) fully pulled up (Auto operation) Below 1 V
H4-10 (UP) - H4-1 (GND) L - W-B Power window motor up input Ignition switch ON, driver door power window fully closed 11 to 14 V



CHECK POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR FRONT PASSENGER DOOR)


B280976E30
2.365,0.75 2.76,0.99 0.396,0.24 2.521,0.792 2.792,0.969 0.271,0.177 10 false I5

a.

Disconnect the I5 power window regulator motor assembly (for front passenger door) connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connector disconnected.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
I5-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
I5-2 (B) - Body ground L - Body ground Power supply Always 11 to 14 V


c.

Reconnect the I5 power window regulator motor assembly (for front passenger door) connector.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
I5-5 (IG) - I5-1 (GND) LG - W-B IG power supply Ignition switch ON 11 to 14 V
I5-5 (IG) - I5-1 (GND) LG - W-B IG power supply Ignition switch off Below 1 V
I5-4 (AUTO) - I5-1 (GND) B - W-B Power window motor auto up input Ignition switch ON, front passenger door power window fully open 11 to 14 V
I5-4 (AUTO) - I5-1 (GND) B - W-B Power window motor auto up input Ignition switch ON, front passenger door power window moving, power window regulator switch assembly fully pulled up (Auto operation) Below 1 V
I5-4 (AUTO) - I5-1 (GND) B - W-B Power window motor auto up input Ignition switch ON, front passenger door power window fully closed 11 to 14 V
I5-4 (AUTO) - I5-1 (GND) B - W-B Power window motor auto down input Ignition switch ON, front passenger door power window fully closed 11 to 14 V
I5-4 (AUTO) - I5-1 (GND) B - W-B Power window motor auto down input Ignition switch ON, front passenger door power window moving, power window regulator switch assembly fully pushed down (Auto operation) Below 1 V
I5-4 (AUTO) - I5-1 (GND) B - W-B Power window motor auto down input Ignition switch ON, front passenger door power window fully open 11 to 14 V
I5-7 (DOWN) - I5-1 (GND) V - W-B Power window motor down input Ignition switch ON, power window regulator switch assembly not pushed or pulled 11 to 14 V
I5-7 (DOWN) - I5-1 (GND) V - W-B Power window motor down input Ignition switch ON, front passenger door power window moving, power window regulator switch assembly pushed halfway down (Manual operation) Below 1 V
I5-7 (DOWN) - I5-1 (GND) V - W-B Power window motor down input Ignition switch ON, front passenger door power window fully closed 11 to 14 V
I5-7 (DOWN) - I5-1 (GND) V - W-B Power window motor down input Ignition switch ON, front passenger door power window moving, power window regulator switch assembly fully pushed down (Auto operation) Below 1 V
I5-7 (DOWN) - I5-1 (GND) V - W-B Power window motor down input Ignition switch ON, front passenger door power window fully open 11 to 14 V
I5-10 (UP) - I5-1 (GND) L - W-B Power window motor up input Ignition switch ON, power window regulator switch assembly not pushed or pulled 11 to 14 V
I5-10 (UP) - I5-1 (GND) L - W-B Power window motor up input Ignition switch ON, front passenger door power window moving, power window regulator switch assembly pulled halfway up (Manual operation) Below 1 V
I5-10 (UP) - I5-1 (GND) L - W-B Power window motor up input Ignition switch ON, front passenger door power window fully open 11 to 14 V
I5-10 (UP) - I5-1 (GND) L - W-B Power window motor up input Ignition switch ON, front passenger door power window moving, power window regulator switch assembly fully pulled up (Auto operation) Below 1 V
I5-10 (UP) - I5-1 (GND) L - W-B Power window motor up input Ignition switch ON, front passenger door power window fully closed 11 to 14 V



CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY


B357834C01
1.083,3.479 1.5,3.75 0.417,0.271 3.594,3.5 4.01,3.771 0.417,0.271 5.917,3.479 6.333,3.75 0.417,0.271 1.417,4.833 1.833,5.104 0.417,0.271 4.042,4.833 4.458,5.104 0.417,0.271 5.563,4.906 5.979,5.177 0.417,0.271 1.385,6.396 1.802,6.667 0.417,0.271 4.844,6.396 5.26,6.667 0.417,0.271 6.438,4.906 6.854,5.177 0.417,0.271 3.417,7.958 3.833,8.229 0.417,0.271 2.083,0.604 2.083,0.25 2.083,0.25 2.25,0.25 false 2.167,1.083 2.583,1.083 false 2.167,1.583 2.583,1.583 false 2.167,2.083 2.583,2.083 false 1.667,1.583 2.021,1.583 false 1.667,2.083 2.021,2.083 false 1.667,2.5 1.667,1.083 1.667,1.083 2.021,1.083 false 4.583,0.552 4.583,0.198 4.583,0.198 4.75,0.198 false 0.156,0.135 0.531,0.375 0.375,0.24 12 false *A 0.552,1.052 0.833,1.219 0.281,0.167 10 false 4H 0.552,1.823 0.833,1.99 0.281,0.167 10 false 4F 0.563,2.25 0.844,2.417 0.281,0.167 10 false 4K 0.833,2.521 1.115,2.688 0.281,0.167 10 false 4L 2.302,0.188 2.615,0.385 0.313,0.198 10 false *1 1.594,2.531 1.906,2.729 0.313,0.198 10 false *a 2.646,1.01 3.104,1.26 0.458,0.25 10 false F20 2.656,1.51 3.104,1.771 0.448,0.26 10 false F19 2.656,2.01 3.094,2.24 0.438,0.229 10 false F18 4.813,0.125 5.156,0.344 0.344,0.219 10 false MB 6.458,0.927 6.823,1.094 0.365,0.167 10 false 4D 6.458,1.75 6.823,1.917 0.365,0.167 10 false 4A 1.177,3.531 1.458,3.698 0.281,0.167 10 false F18 3.688,3.563 4.219,3.823 0.531,0.26 10 false F19 6.021,3.542 6.479,3.781 0.458,0.24 10 false F20 1.531,4.896 1.813,5.063 0.281,0.167 10 false 4H 4.177,4.896 4.458,5.063 0.281,0.167 10 false 4F 5.688,4.979 5.969,5.146 0.281,0.167 10 false 4K 3.521,8.021 3.885,8.25 0.365,0.229 10 false MB 1.521,6.458 1.802,6.625 0.281,0.167 10 false 4D 4.969,6.458 5.25,6.625 0.281,0.167 10 false 4A 6.573,4.969 6.854,5.135 0.281,0.167 10 false 4L
*A Main Body ECU (Multiplex Network Body ECU) with 3 Connectors - -
*1 Main Body ECU (Multiplex Network Body ECU) - -
*a 3 Connectors - -


B357833C01
4.99,3.521 5.396,3.792 0.406,0.271 1.427,4.823 1.833,5.094 0.406,0.271 4.083,4.802 4.49,5.073 0.406,0.271 5.573,4.927 5.979,5.198 0.406,0.271 1.354,6.396 1.76,6.667 0.406,0.271 4.865,6.396 5.271,6.667 0.406,0.271 6.469,4.927 6.875,5.198 0.406,0.271 3.458,7.969 3.865,8.24 0.406,0.271 1.792,3.521 2.198,3.792 0.406,0.271 2.25,0.25 2.083,0.25 2.083,0.25 2.083,0.604 false 2.5,2.083 2.25,2.083 2.25,2.083 2.167,2.083 false 2.5,1.583 2.25,1.583 2.25,1.583 2.167,1.583 false 2.021,1.583 1.667,1.583 1.667,1.583 1.667,2.417 false 2.021,2.083 1.75,2.083 1.75,2.083 1.667,2.083 false 4.833,0.198 4.667,0.198 4.667,0.198 4.667,0.552 false 0.125,0.094 0.5,0.333 0.375,0.24 12 false *A 0.552,1.052 0.75,1.25 0.198,0.198 10 false 4H 0.552,1.802 0.75,2 0.198,0.198 10 false 4F 0.563,2.24 0.76,2.438 0.198,0.198 10 false 4K 0.833,2.51 1.031,2.708 0.198,0.198 10 false 4L 2.365,0.156 2.563,0.354 0.198,0.198 10 false *1 2.563,1.479 2.99,1.719 0.427,0.24 10 false F19 2.583,1.969 2.958,2.25 0.375,0.281 10 false F18 1.604,2.448 1.802,2.646 0.198,0.198 10 false *a 4.917,0.083 5.167,0.25 0.25,0.167 10 false MB 6.458,0.906 6.656,1.104 0.198,0.198 10 false 4D 6.458,1.74 6.656,1.938 0.198,0.198 10 false 4A 1.875,3.573 2.396,3.802 0.521,0.229 10 false F18 5.083,3.573 5.771,3.938 0.688,0.365 10 false F19 1.552,4.885 1.833,5.083 0.281,0.198 10 false 4H 4.208,4.854 4.406,5.052 0.198,0.198 10 false 4F 5.698,4.99 6.021,5.208 0.323,0.219 10 false 4K 1.479,6.448 1.677,6.646 0.198,0.198 10 false 4D 4.99,6.448 5.188,6.646 0.198,0.198 10 false 4A 6.604,4.99 6.802,5.188 0.198,0.198 10 false 4L 3.563,8.021 3.844,8.271 0.281,0.25 10 false MB
*A Main Body ECU (Multiplex Network Body ECU) with 2 Connectors - -
*1 Main Body ECU (Multiplex Network Body ECU) - -
*a 2 Connectors - -


a.

Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assembly.

Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>REMOVAL


b.

Reconnect the instrument panel junction block assembly connectors.


c.

Measure the voltage and resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connectors disconnected.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
MB-11 (GND1) - Body ground - Ground Always Below 1 Ω
MB-31 (BECU) - Body ground - Battery power supply Always 11 to 14 V
MB-30 (ACC) - Body ground - ACC power supply Ignition switch ACC 11 to 14 V
MB-30 (ACC) - Body ground - ACC power supply Ignition switch off Below 1 V
MB-32 (IG) - Body ground - IG power supply Ignition switch ON 11 to 14 V
MB-32 (IG) - Body ground - IG power supply Ignition switch off Below 1 V


d.

Install the main body ECU (multiplex network body ECU) to the instrument panel junction block assembly.

Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>INSTALLATION


e.

Measure the voltage and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F19-9 (PWS) - Body ground Y - Body ground Power window relay operation signal Ignition switch ON 11 to 14 V
F19-9 (PWS) - Body ground Y - Body ground Power window relay operation signal Approximately 43 seconds after ignition switch turned off Below 1 V
F19-6 (FLCY) - Body ground SB - Body ground Front door courtesy light switch assembly (for LH) input Front door LH open Below 1 V
F19-6 (FLCY) - Body ground SB - Body ground Front door courtesy light switch assembly (for LH) input Front door LH closed 11 to 14 V
F19-27 (FRCY) - Body ground L - Body ground Front door courtesy light switch assembly (for RH) input Front door RH open Below 1 V
F19-27 (FRCY) - Body ground L - Body ground Front door courtesy light switch assembly (for RH) input Front door RH closed 11 to 14 V
F19-29 (L2) - Body ground V - Body ground Driver door key-linked lock input Driver door key cylinder turned to lock Below 1 V
F19-29 (L2) - Body ground V - Body ground Driver door key-linked lock input Driver door key cylinder off Pulse generation
F19-2 (UL3) - Body ground SB - Body ground Driver door key-linked unlock input Driver door key cylinder turned to unlock Below 1 V
F19-2 (UL3) - Body ground SB - Body ground Driver door key-linked unlock input Driver door key cylinder off Pulse generation