Home › Vehicle Exterior › DOOR / HATCH › POWER BACK DOOR SYSTEM › from 2018.09
RM3160E _59 Vehicle Exterior _019719 DOOR / HATCH _0109291 POWER BACK DOOR SYSTEM U

DOOR / HATCH  POWER BACK DOOR SYSTEM  TERMINALS OF ECU  


CHECK MULTIPLEX NETWORK DOOR ECU


C278778N03
2.417,0.531 2.833,0.781 0.417,0.25 4.302,0.51 4.719,0.76 0.417,0.25 2.563,0.573 3.021,0.771 0.458,0.198 10 false X7 4.448,0.552 4.906,0.75 0.458,0.198 10 false X6

a.

Disconnect the X6 and X7 multiplex network door ECU connectors.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
X6-1 (ECUB) - Body ground BE - Body ground Battery power supply Always 11 to 14 V
X6-7 (IG) - Body ground Y - Body ground IG power supply Engine switch on (IG) 11 to 14 V
X6-7 (IG) - Body ground Y - Body ground IG power supply Engine switch off Below 1 V
X7-8 (B) - Body ground G - Body ground Battery power supply Always 11 to 14 V
X7-7 (GND) - Body ground W-B - Body ground Body ground Always Below 1 Ω


c.

Reconnect the X6 and X7 multiplex network door ECU connectors.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
X6-2 (DSG2) - Body ground BR - Body ground Power back door unit assembly set RH (door sensor) ground Always Below 1 V
X6-3 (DSV2) - Body ground L - Body ground Power back door unit assembly set RH (door sensor) power supply Always 7 V or higher
X6-5 (BZR+) - Body ground B - Body ground Wireless door lock buzzer signal Power back door warning buzzer sounding Pulse generation
Power back door warning buzzer not sounding Below 1 V
X6-6 (BDDN) - Body ground L - Body ground Back door control switch signal Back door control switch on Below 1 V
Back door control switch off Pulse generation
X6-11 (DSG) - Body ground R - Body ground Power back door unit assembly set LH (door sensor) ground Always Below 1 V
X6-12 (DSV) - Body ground GR - Body ground Power back door unit assembly set LH (door sensor) power supply Always 7 V or higher
X6-16 (OSR) - X6-17 (OSE) SB - Y Power back door sensor assembly RH signal Power back door sensor assembly RH not pressed 4 to 6 V
Power back door sensor assembly RH pressed Below 1 V
X6-18 (OSL) - X6-17 (OSE) LG - Y Power back door sensor assembly LH signal Power back door sensor assembly LH not pressed 4 to 6 V
Power back door sensor assembly LH pressed Below 1 V
X6-22 (DS2) - Body ground B - Body ground Power back door unit assembly set LH (door sensor) signal Power back door not operating 7 V or higher
Power back door operating Pulse generation
(See waveform 2)
X6-23 (DS1) - Body ground SB - Body ground Power back door unit assembly set LH (door sensor) signal Power back door not operating 7 V or higher
Power back door operating Pulse generation
(See waveform 1)
X6-25 (DS22) - Body ground W - Body ground Power back door unit assembly set RH (door sensor) signal Power back door not operating 7 V or higher
Power back door operating Pulse generation
(See waveform 2)
X6-26 (DS12) - Body ground V - Body ground Power back door unit assembly set RH (door sensor) signal Power back door not operating 7 V or higher
Power back door operating Pulse generation
(See waveform 1)
X7-10 (DC+) - X7-9 (DC-) LA-V - LA-W Back door lock assembly (back door lock motor) circuit Back door lock motor operating 11 to 14 V

i.
E357125N01
2.854,1.76 3.313,1.958 0.458,0.198 10 false GND

Using an oscilloscope, check waveform 1.

Waveform 1 (Reference)
Item Condition
Tester connection
·

X6-23 (DS1) - Body ground

·

X6-26 (DS12) - Body ground


Tool setting 2 V/DIV., 2 ms./DIV.
Vehicle condition Power back door operating

HINT:

The period changes in accordance to the speed at which the power back door is opened and closed.



ii.
E357126N01
2.854,1.75 3.313,1.948 0.458,0.198 10 false GND

Using an oscilloscope, check waveform 2.

Waveform 2 (Reference)
Item Condition
Tester connection
·

X6-22 (DS2) - Body ground

·

X6-25 (DS22) - Body ground


Tool setting 2 V/DIV., 2 ms./DIV.
Vehicle condition Power back door operating

HINT:

The period changes in accordance to the speed at which the power back door is opened and closed.





CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)


B340022N19
4.99,0.292 5.417,0.521 0.427,0.229 1.552,0.26 1.979,0.49 0.427,0.229 3.25,0.292 3.677,0.521 0.427,0.229 1.656,0.292 2.115,0.49 0.458,0.198 10 false F10 5.094,0.323 5.552,0.521 0.458,0.198 10 false F13 3.365,0.323 3.823,0.521 0.458,0.198 10 false F12

a.

Disconnect the F13 and F10 certification ECU (smart key ECU assembly) connectors.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F13-10 (+B) - Body ground GR - Body ground Battery power supply Always 11 to 14 V
F10-4 (CUTB) - Body ground BE - Body ground Battery power supply Always 11 to 14 V
F13-11 (E) - Body ground W-B - Body ground Body ground Always Below 1 Ω


c.

Reconnect the F13 and F10 certification ECU (smart key ECU assembly) connectors.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F10-3 (IG1D) - Body ground G - Body ground IG power supply Engine switch on (IG) 11 to 14 V
F10-3 (IG1D) - Body ground G - Body ground IG power supply Engine switch off Below 1 V
F12-5 (TSW5) - Body ground P - Body ground Back door opener switch assembly signal Back door opener switch assembly off Pulse generation
F12-5 (TSW5) - Body ground P - Body ground Back door opener switch assembly signal Back door opener switch assembly on Below 1 V



CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY


B357833C07
4.99,3.521 5.396,3.792 0.406,0.271 1.427,4.823 1.833,5.094 0.406,0.271 4.083,4.802 4.49,5.073 0.406,0.271 5.573,4.927 5.979,5.198 0.406,0.271 1.354,6.396 1.76,6.667 0.406,0.271 4.865,6.396 5.271,6.667 0.406,0.271 6.469,4.927 6.875,5.198 0.406,0.271 3.458,7.969 3.865,8.24 0.406,0.271 1.792,3.521 2.198,3.792 0.406,0.271 2.25,0.25 2.083,0.25 2.083,0.25 2.083,0.604 false 2.5,2.083 2.25,2.083 2.25,2.083 2.167,2.083 false 2.5,1.583 2.25,1.583 2.25,1.583 2.167,1.583 false 2.021,1.583 1.667,1.583 1.667,1.583 1.667,2.417 false 2.021,2.083 1.75,2.083 1.75,2.083 1.667,2.083 false 4.833,0.198 4.667,0.198 4.667,0.198 4.667,0.552 false 0.125,0.094 0.5,0.333 0.375,0.24 12 false *A 0.552,1.052 0.75,1.25 0.198,0.198 10 false 4H 0.552,1.802 0.75,2 0.198,0.198 10 false 4F 0.563,2.24 0.76,2.438 0.198,0.198 10 false 4K 0.833,2.51 1.031,2.708 0.198,0.198 10 false 4L 2.365,0.156 2.563,0.354 0.198,0.198 10 false *1 2.563,1.479 2.938,1.719 0.375,0.24 10 false F19 2.594,1.969 3.083,2.25 0.49,0.281 10 false F18 1.604,2.448 1.802,2.646 0.198,0.198 10 false *a 4.917,0.083 5.167,0.25 0.25,0.167 10 false MB 6.458,0.906 6.656,1.104 0.198,0.198 10 false 4D 6.458,1.74 6.656,1.938 0.198,0.198 10 false 4A 1.885,3.573 2.417,3.76 0.531,0.188 10 false F18 5.073,3.563 5.438,3.76 0.365,0.198 10 false F19 1.552,4.875 2.083,5.073 0.531,0.198 10 false 4H 4.208,4.854 4.479,5.052 0.271,0.198 10 false 4F 5.698,4.99 5.896,5.188 0.198,0.198 10 false 4K 1.479,6.448 1.677,6.646 0.198,0.198 10 false 4D 4.99,6.448 5.188,6.646 0.198,0.198 10 false 4A 6.604,4.99 6.896,5.219 0.292,0.229 10 false 4L 3.563,8.021 3.844,8.271 0.281,0.25 10 false MB
*A Main Body ECU (Multiplex Network Body ECU) with 2 Connectors - -
*1 Main Body ECU (Multiplex Network Body ECU) - -
*a 2 Connectors - -


B357834C07
1.083,3.479 1.5,3.75 0.417,0.271 3.594,3.5 4.01,3.771 0.417,0.271 5.917,3.479 6.333,3.75 0.417,0.271 1.417,4.833 1.833,5.104 0.417,0.271 4.042,4.833 4.458,5.104 0.417,0.271 5.563,4.906 5.979,5.177 0.417,0.271 1.385,6.396 1.802,6.667 0.417,0.271 4.844,6.396 5.26,6.667 0.417,0.271 6.438,4.906 6.854,5.177 0.417,0.271 3.417,7.958 3.833,8.229 0.417,0.271 2.083,0.604 2.083,0.25 2.083,0.25 2.25,0.25 false 2.167,1.083 2.583,1.083 false 2.167,1.583 2.583,1.583 false 2.167,2.083 2.583,2.083 false 1.667,1.583 2.021,1.583 false 1.667,2.083 2.021,2.083 false 1.667,2.5 1.667,1.083 1.667,1.083 2.021,1.083 false 4.583,0.552 4.583,0.198 4.583,0.198 4.75,0.198 false 0.156,0.135 0.531,0.375 0.375,0.24 12 false *A 0.552,1.052 0.833,1.219 0.281,0.167 10 false 4H 0.552,1.823 0.833,1.99 0.281,0.167 10 false 4F 0.552,2.24 0.833,2.406 0.281,0.167 10 false 4K 0.833,2.521 1.115,2.688 0.281,0.167 10 false 4L 2.302,0.188 2.615,0.385 0.313,0.198 10 false *1 1.594,2.531 1.906,2.729 0.313,0.198 10 false *a 2.646,1.01 3.167,1.313 0.521,0.302 10 false F20 2.656,1.51 3.125,1.823 0.469,0.313 10 false F19 2.656,2.01 3.125,2.333 0.469,0.323 10 false F18 4.813,0.125 5.156,0.344 0.344,0.219 10 false MB 6.458,0.927 6.823,1.094 0.365,0.167 10 false 4D 6.458,1.75 6.823,1.917 0.365,0.167 10 false 4A 1.177,3.542 1.458,3.708 0.281,0.167 10 false F18 3.698,3.563 3.979,3.729 0.281,0.167 10 false F19 6.021,3.542 6.302,3.708 0.281,0.167 10 false F20 1.542,4.896 1.823,5.063 0.281,0.167 10 false 4H 4.177,4.896 4.458,5.063 0.281,0.167 10 false 4F 5.688,4.979 5.969,5.146 0.281,0.167 10 false 4K 3.521,8.021 3.885,8.25 0.365,0.229 10 false MB 1.521,6.458 1.802,6.625 0.281,0.167 10 false 4D 4.969,6.458 5.25,6.625 0.281,0.167 10 false 4A 6.573,4.969 6.854,5.135 0.281,0.167 10 false 4L
*A Main Body ECU (Multiplex Network Body ECU) with 3 Connectors - -
*1 Main Body ECU (Multiplex Network Body ECU) - -
*a 3 Connectors - -


a.

Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assembly.

Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>REMOVAL


b.

Reconnect the instrument panel junction block assembly connectors.


c.

Measure the voltage and resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connector disconnected.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
MB-31 (BECU) - Body ground - Battery power supply Always 11 to 14 V
MB-30 (ACC) - Body ground - ACC power supply Engine switch on (ACC) 11 to 14 V
MB-30 (ACC) - Body ground - ACC power supply Engine switch off Below 1 V
MB-32 (IG) - Body ground - IG power supply Engine switch on (IG) 11 to 14 V
MB-32 (IG) - Body ground - IG power supply Engine switch off Below 1 V
MB-11 (GND1) - Body ground - Body ground Always Below 1 Ω


d.

Install the main body ECU (multiplex network body ECU) to the instrument panel junction block assembly.

Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>INSTALLATION


e.

Measure the voltage and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F18-5 (PBDS) - Body ground GR - Body ground Rear door control switch signal Rear door control switch off Pulse generation
F18-5 (PBDS) - Body ground GR - Body ground Rear door control switch signal Rear door control switch on Below 1 V