Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
1.INSTALL OUTER REAR VIEW MIRROR ASSEMBLY WITH COVER
Engage the 2 guides and claw.
Install the outer rear view mirror assembly with cover with the 3 nuts.
Connect each connector.
Engage the clamp.
87964
2.INSTALL OUTER MIRROR INSTALL HOLE COVER
Engage the 3 claws.
Install the outer mirror install hole cover with the screw.
Engage the 2 clamps.
67602
3.INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
81230N
4.INSTALL COURTESY LIGHT ASSEMBLY
5.INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Driver Side)
6.INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Front Passenger Side)
69278B
7.INSTALL FRONT DOOR INSIDE HANDLE BEZEL
67492A
8.INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH
9.PERFORM CALIBRATION (w/ Panoramic View Monitor System)