87103D
1.INSTALL REAR BLOWER MOTOR WITH FAN SUB-ASSEMBLY
Install the rear blower motor with fan sub-assembly with the 3 screws.
Replace the rear blower motor with fan sub-assembly if it has been dropped or subjected to a severe impact.
Connect the connector.
64730B
2.INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH
66311
3.INSTALL ROPE HOOK (for RH Side)
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
64725F
4.INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for RH Side)
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
64974
5.INSTALL DECK TRIM POCKET COVER (for RH Side)
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
88625T
6.INSTALL COOLER (NO. 2 ROOM TEMP. SENSOR) THERMISTOR
64714H
7.INSTALL NO. 1 DECK SIDE TRIM COVER
Use the same procedure as for the No. 2 deck side trim cover.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
64712F
8.INSTALL FRONT DECK SIDE TRIM COVER RH
62331C
9.CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH
67917A
10.INSTALL REAR DOOR SCUFF PLATE RH
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
72137S
11.INSTALL REAR OUTER SEAT TRACK BRACKET COVER RH
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
12.INSTALL REAR NO. 2 SEAT ASSEMBLY
58387B
13.INSTALL REAR FLOOR FINISH PLATE