73380A
1.INSTALL REAR SEAT INNER BELT ASSEMBLY
| *a | Protruding Part |
Install the rear seat inner belt assembly with the bolt.
Do not allow the anchor part of the rear seat inner belt assembly to overlap the protruding part of the seatback frame.
| *a | Rubber Band |
Pass the rear seat inner belt assembly through the rubber band of the separate type rear seat cushion cover with pad as shown in the illustration.
w/ Rear No. 2 Seat Belt Warning:
Connect the connector.
Engage the clamp.
71828B
2.INSTALL REAR SEAT CUSHION REAR MOULDING RH
3.INSTALL REAR NO. 1 SEAT ASSEMBLY