Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROCKER PANEL MOULDING
RM37A0E _59 Vehicle Exterior _086903 EXTERIOR PANELS / TRIM _0417663 ROCKER PANEL MOULDING A

EXTERIOR PANELS / TRIM  ROCKER PANEL MOULDING  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 75860A 1.INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY

a.

Install 8 new clips to the body rocker panel moulding assembly.


b.

Engage the 8 clips.


c.

Install the body rocker panel moulding assembly with the 2 screws and 9 clips.


d.

Remove the protective tape.


Hide 75602A 3.INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY