86841
1.INSTALL NAVIGATION ECU
86212F
2.INSTALL NO. 4 RADIO RECEIVER BRACKET
Install the No. 4 radio receiver bracket with the 2 screws.
86211M
3.INSTALL NO. 3 RADIO RECEIVER BRACKET
Install the No. 3 radio receiver bracket with the 2 screws.
86101H
4.INSTALL ANTENNA CORD SUB-ASSEMBLY
Engage the 2 clamps to install the antenna cord sub-assembly.
Connect the connector.
5.INSTALL NAVIGATION ECU WITH BRACKET
Connect each connector.
Install the navigation ECU with bracket with the 2 nuts.
Engage the clamp.
Connect the connector.
86740
6.INSTALL TELEMATICS TRANSCEIVER (w/ Telematics Transceiver)
58816B
7.INSTALL FRONT CONSOLE BOX INSERT
58817A
8.INSTALL FRONT NO. 2 CONSOLE BOX INSERT
55434F
9.INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL
55303B
10.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
55607
11.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
55435A
12.INSTALL INSTRUMENT PANEL FINISH END PANEL RH
62311B
13.CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH
Use the same procedure as for the LH side.
Click hereVehicle Exterior>DOOR / HATCH>FRONT DOOR OPENING TRIM WEATHERSTRIP>INSTALLATION
62111A
14.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
67913
15.INSTALL FRONT DOOR SCUFF PLATE RH
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
55446A
16.INSTALL NO. 1 SWITCH HOLE BASE
55606
17.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
62112A
18.INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
67914
19.INSTALL FRONT DOOR SCUFF PLATE LH
20.INSTALL CONSOLE BOX ASSEMBLY