Home › Engine / Hybrid System › CRUISE CONTROL › FRONT CAMERA SYSTEM › 2020.02–2020.11
RM37A0E _51 Engine / Hybrid System _086858 CRUISE CONTROL _0418321 FRONT CAMERA SYSTEM C

CRUISE CONTROL  FRONT CAMERA SYSTEM  U030051  Internal Control Module Software Incompatibility Not Programmed  


DESCRIPTION

for HV Model

The forward recognition camera receives vehicle information from the hybrid vehicle control ECU via CAN communication.

DTC U030051 is stored when the vehicle information from the hybrid vehicle control ECU cannot be confirmed.


for Gasoline Model

The forward recognition camera receives vehicle information from the ECM via CAN communication.

DTC U030051 is stored when the vehicle information from the ECM cannot be confirmed.


DTC No. Detection Item DTC Detection Condition Trouble Area
U030051 Internal Control Module Software Incompatibility Not Programmed
for HV Model

The forward recognition camera cannot confirm the vehicle information from the hybrid vehicle control ECU.


for Gasoline Model

The forward recognition camera cannot confirm the vehicle information from the ECM.


for HV Model
·

Hybrid control system

·

Forward recognition camera

·

Hybrid vehicle control ECU


for Gasoline Model
·

SFI system

·

Forward recognition camera

·

ECM



CAUTION / NOTICE / HINT

NOTICE:
·

Before replacing the hybrid vehicle control ECU, refer to Service Bulletin.*1

·

Before replacing the ECM, refer to Service Bulletin.*2

·

When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle. As a result, a DTC may be stored.

·

If the forward recognition camera has been replaced with a new one, be sure to perform forward recognition camera adjustment.

HINT:

Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.

One Time Recognition: Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (ONE TIME RECOGNITION)

Sequential Recognition: Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (SEQUENTIAL RECOGNITION)


*1: for HV Model

*2: for Gasoline Model




PROCEDURE

1.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
for HV Model A
for Gasoline Model B



A

2.CHECK FOR DTCs

B

5.CHECK FOR DTCs
2.CHECK FOR DTCs
a.

Check for DTCs of hybrid control system.

Powertrain > Hybrid Control > Trouble Codes
50001 397

Result:
Result Proceed to
DTCs are not output A
DTCs are output B



A

3.CHECK FOR DTCs (HEALTH CHECK)

B

3.CHECK FOR DTCs (HEALTH CHECK)
a.

Check for DTCs.


b.

Turn the ignition switch off.


OK:

DTCs indicating a vehicle information mismatch with that of the hybrid vehicle control ECU are not output by any ECU other than the forward recognition camera.


Result:
Proceed to
OK
NG



OK

4.READ VALUE USING GTS

NG

4.READ VALUE USING GTS
a.

Read the Data List according to the display on the GTS.

Chassis > Front Recognition Camera > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
HV Equipped Information Vehicle information (conventional/hybrid) stored in forward recognition camera Non-HV / HV Non-HV: Conventional vehicle
HV: Hybrid vehicle
-
Chassis > Front Recognition Camera > Data List
Tester Display
HV Equipped Information
50003 430 20
HINT:
·

If the vehicle information stored in the forward recognition camera is different from the actual vehicle specifications, the vehicle information stored in the forward recognition camera may be incorrect. Replace the forward recognition camera.

·

If the vehicle information stored in the forward recognition camera matches the actual vehicle specifications, the installed hybrid vehicle control ECU is incompatible. Replace the hybrid vehicle control ECU.




Result:
Result Proceed to
Vehicle information stored in forward recognition camera and actual vehicle specifications do not match A
Vehicle information stored in forward recognition camera and actual vehicle specifications match B



A

REPLACE FORWARD RECOGNITION CAMERA

B

5.CHECK FOR DTCs
a.

Check for DTCs of SFI system.

Powertrain > Engine > Trouble Codes
50001 372

Result:
Result Proceed to
DTCs are not output A
DTCs are output B



A

6.CHECK FOR DTCs (HEALTH CHECK)

B

6.CHECK FOR DTCs (HEALTH CHECK)
a.

Check for DTCs.


b.

Turn the ignition switch off.


OK:

DTCs indicating a vehicle information mismatch with that of the ECM are not output by any ECU other than the forward recognition camera.


Result:
Proceed to
OK
NG



OK

7.READ VALUE USING GTS

NG

7.READ VALUE USING GTS
a.

Read the Data List according to the display on the GTS.

Chassis > Front Recognition Camera > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
HV Equipped Information Vehicle information (conventional/hybrid) stored in forward recognition camera Non-HV / HV Non-HV: Conventional vehicle
HV: Hybrid vehicle
-
Chassis > Front Recognition Camera > Data List
Tester Display
HV Equipped Information
50003 430 20
HINT:
·

If the vehicle information stored in the forward recognition camera is different from the actual vehicle specifications, the vehicle information stored in the forward recognition camera may be incorrect. Replace the forward recognition camera.

·

If the vehicle information stored in the forward recognition camera matches the actual vehicle specifications, the installed ECM is incompatible. Replace the ECM.




Result:
Result Proceed to
Vehicle information stored in forward recognition camera and actual vehicle specifications do not match A
Vehicle information stored in forward recognition camera and actual vehicle specifications match B



A

REPLACE FORWARD RECOGNITION CAMERA

B