Home › Engine / Hybrid System › 2GR-FKS (ENGINE CONTROL) › VACUUM SWITCHING VALVE (for Engine Mounting)
RM37A0E _51 Engine / Hybrid System _086849 2GR-FKS ENGINE CONTROL _0418438 VACUUM SWITCHING VALVE(for Engine Mounting) A

2GR-FKS ENGINE CONTROL  VACUUM SWITCHING VALVE(for Engine Mounting)  REMOVAL  


PROCEDURE

Hide 53295E 1.REMOVE COOL AIR INTAKE DUCT SEAL

Hide 17750A 2.REMOVE INLET AIR CLEANER ASSEMBLY

Hide 17650E 3.REMOVE VACUUM SWITCHING VALVE (for Active Control Engine Mount System)

a.
A454761

Disengage the wire harness clamp and disconnect the vacuum switching valve (for active control engine mount system) connector.


b.

Disengage the vacuum hose clamp.


c.

Disconnect the 3 vacuum hoses from the vacuum switching valve (for active control engine mount system).


d.
A454762

Remove the nut and vacuum switching valve (for active control engine mount system) from the front engine mounting insulator.