12361
1.INSTALL FRONT ENGINE MOUNTING INSULATOR
Engage the clamp to install the vacuum hose to the front engine mounting insulator.
Connect the vacuum hose to the front engine mounting insulator.
Install the front engine mounting insulator to the front frame assembly with the 3 nuts.
Install the front engine mounting bracket to the transaxle housing with the 3 bolts.
Temporarily tighten the bolt (A), and then fully tighten the 3 bolts in the order of (B), (C) and (A).
Install the front engine mounting bracket to the front engine mounting insulator with the bolt.
Install the 2 bolts.
Connect the transmission wire connector and rotate the lever to lock it.
Connect the ECM connector and rotate the lever to lock it.
When connecting the ECM connector, make sure that the connecting parts of the ECM connector are free of dirt, water and other foreign matter.
Be sure to securely connect the ECM connector.
Install the engine wire with the bolt.
Engage the 4 wire harness clamps.
2.INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE
51444A
3.INSTALL REAR ENGINE UNDER COVER LH
51441
4.INSTALL NO. 1 ENGINE UNDER COVER
53852B
5.INSTALL FRONT WHEEL OPENING EXTENSION PAD LH
53851D
6.INSTALL FRONT WHEEL OPENING EXTENSION PAD RH
17650E
7.INSTALL VACUUM SWITCHING VALVE (for Active Control Engine Mount System)
8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL