53336A
1.INSTALL HOOD STAY BRACKET
Engage the guide.
Install the hood stay bracket with the bolt.
53440D
2.INSTALL HOOD SUPPORT ASSEMBLY
Engage the 3 claws to install the hood support assembly.
53452
3.INSTALL HOOD STAY HOLDER
Engage the 2 claws to install the hood stay holder.
4.CONNECT WASHER HOSE ASSEMBLY (w/o Heater)
Engage the grommet.
Engage the 3 clamps to connect the washer hose assembly.
5.CONNECT WASHER HOSE ASSEMBLY (w/ Heater)
Engage the grommet.
Engage the 4 clamps to connect the washer hose assembly.
85035
6.INSTALL WASHER NOZZLE SUB-ASSEMBLY (w/o Heater)
85380
7.INSTALL FRONT WASHER NOZZLE AND HOSE ASSEMBLY (w/ Heater)
85035
8.INSPECT WASHER NOZZLE SUB-ASSEMBLY
85035
9.ADJUST WASHER NOZZLE SUB-ASSEMBLY (w/o Heater)
85380
10.ADJUST FRONT WASHER NOZZLE AND HOSE ASSEMBLY (w/ Heater)
53341B
11.INSTALL HOOD INSULATOR
|
Install in this Direction |
Engage the 2 guides as shown in the illustration.
Install the hood insulator with 8 new hood insulator clips.
53381
12.INSTALL HOOD TO RADIATOR SUPPORT SEAL
Install the hood to radiator support seal with 9 new hood to radiator support seal clips.