Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › BATTERY BLOWER
RM37A0E _51 Engine / Hybrid System _086850 HYBRID / BATTERY CONTROL _0420010 BATTERY BLOWER A

HYBRID / BATTERY CONTROL  BATTERY BLOWER  INSTALLATION  


PROCEDURE

Hide G9230 1.INSTALL BATTERY COOLING BLOWER ASSEMBLY (for LH Side)

a.

Install the battery cooling blower assembly to the No. 2 battery cooling bracket with the 3 nuts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)

NOTICE:
·

Be sure not to touch the fan part of the battery cooling blower assembly.

·

Do not lift the battery cooling blower assembly using the wire harness.




b.

Engage the clamp.


Hide G92E1A 2.INSTALL NO. 1 HV BATTERY INTAKE DUCT LH

a.

Install the No. 1 HV battery intake duct LH to the battery cooling blower assembly with the clip.


b.

Engage the claw.


Hide 3.INSTALL BLOWER SUB-ASSEMBLY (for LH Side)

a.

Engage the 2 claws.


b.
A455515N01
1.292,1.927 1.448,2.125 0.156,0.198 10 true A 1,0.24 1.156,0.438 0.156,0.198 10 true B 1.49,0.083 1.646,0.281 0.156,0.198 10 true B 2.49,1.365 2.646,1.563 0.156,0.198 10 true A

Install the blower sub-assembly to the HV battery with the 4 bolts.

Torque:
Bolt A : 19 N*m (194 kgf*cm, 14 ft.*lbf)
Bolt B : 7.5 N*m (76 kgf*cm, 66 in.*lbf)


c.

Connect the battery cooling blower assembly connector.


d.

Engage the 3 clamps.


Hide G9230 4.INSTALL BATTERY COOLING BLOWER ASSEMBLY (for RH Side)

a.

Install the battery cooling blower assembly to the No. 1 battery cooling bracket with the 3 nuts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)

NOTICE:
·

Be sure not to touch the fan part of the battery cooling blower assembly.

·

Do not lift the battery cooling blower assembly using the wire harness.




b.

Engage the clamp.


Hide G92D1 5.INSTALL NO. 1 HYBRID BATTERY INTAKE DUCT

a.

Install the No. 1 hybrid battery intake duct to the battery cooling blower assembly with the 2 clips.


Hide 6.INSTALL BLOWER SUB-ASSEMBLY (for RH Side)

a.

Engage the 2 claws.


b.
A455518N01
1.01,1.573 1.167,1.771 0.156,0.198 10 true A 2.26,1.802 2.417,2 0.156,0.198 10 true A 2.01,0.156 2.167,0.354 0.156,0.198 10 true B 2.583,0.448 2.74,0.646 0.156,0.198 10 true B

Install the blower sub-assembly to the HV battery with the 4 bolts.

Torque:
Bolt A : 19 N*m (194 kgf*cm, 14 ft.*lbf)
Bolt B : 7.5 N*m (76 kgf*cm, 66 in.*lbf)


c.

Connect the battery cooling blower assembly connector.


Hide 58556C 7.INSTALL REAR FLOOR SILENCER

a.

Install the rear floor silencer with the 2 clips.


Hide 58510D 8.INSTALL FRONT FLOOR CARPET ASSEMBLY

a.

Return the front floor carpet assembly to its original position.


b.

Install the 2 clips.