Home › Vehicle Interior › SEAT › FRONT POWER SEAT CONTROL SYSTEM (w/ Memory) › 2020.02–2020.11
RM37A0E _58 Vehicle Interior _086894 SEAT _0420115 FRONT POWER SEAT CONTROL SYSTEM(w/ Memory) J

SEAT  FRONT POWER SEAT CONTROL SYSTEM(w/ Memory)  One or more Power Seat Motors do not Operate  


DESCRIPTION

Signals are input into the position control ECU assembly (driver seat). The built-in ECU manages the signals received from the position control ECU assembly (driver seat) and operates each motor. If the position control ECU assembly (driver seat) receives 2 or more operation signals for the same motor, the motor will be stopped. Manual operation resumes when the position control ECU assembly (driver seat) receives only 1 signal.

WIRING DIAGRAM

B567714E04
1.365,1.146 2.135,1.427 0.771,0.281 10 false g6 1.365,1.333 3.552,1.938 2.188,0.604 10 false Lumbar Support Adjuster Assembly (Driver Seat) 2.729,0.417 3.5,0.698 0.771,0.281 10 false 1 2.729,0.917 3.5,1.198 0.771,0.281 10 false 2 2.719,2.125 3.49,2.406 0.771,0.281 10 false 4 1.833,3.021 2.604,3.302 0.771,0.281 10 false g5 1.833,3.198 3,3.479 1.167,0.281 10 false Reclining Motor 1.146,3.531 3.458,3.99 2.313,0.458 10 false Separate Type Front Seatback Spring Assembly (Driver Seat) 1.927,5.302 2.698,5.583 0.771,0.281 10 false e11 1.927,5.448 2.698,5.729 0.771,0.281 10 false Slide Motor 0.594,6.573 1.365,6.854 0.771,0.281 10 false e12 0.917,8.01 1.688,8.292 0.771,0.281 10 false e13 0.365,8.854 4.781,9.188 4.417,0.333 10 false Separate Type Front Seat Cushion Spring Assembly (Driver Seat) 4.865,9.156 6.823,9.74 1.958,0.583 10 false Position Control ECU Assembly (Driver Seat) 4.906,1.021 5.677,1.302 0.771,0.281 10 false e24 5.354,0.49 6.125,0.771 0.771,0.281 10 false L+ 5.354,2.229 6.125,2.51 0.771,0.281 10 false RCL+ 5.354,4.521 6.125,4.802 0.771,0.281 10 false SLD+ 5.354,5.958 6.125,6.24 0.771,0.281 10 false FRV+ 5.354,7.375 6.125,7.656 0.771,0.281 10 false LFT+ 4.979,7.677 5.75,7.958 0.771,0.281 10 false 5 4.979,7.135 5.75,7.417 0.771,0.281 10 false 6 4.969,6.24 5.74,6.521 0.771,0.281 10 false 4 4.979,5.719 5.75,6 0.771,0.281 10 false 7 4.99,4.792 5.76,5.073 0.771,0.281 10 false 5 4.969,4.292 5.74,4.573 0.771,0.281 10 false 1 4.979,2.51 5.75,2.792 0.771,0.281 10 false 6 4.948,2 5.719,2.281 0.771,0.281 10 false 10 4.979,0.781 5.75,1.063 0.771,0.281 10 false 3 5,0.271 5.771,0.552 0.771,0.281 10 false 9 5.365,1.01 6.135,1.292 0.771,0.281 10 false L- 5.354,2.75 6.125,3.031 0.771,0.281 10 false RCL- 5.354,5.042 6.125,5.323 0.771,0.281 10 false SLD- 5.365,6.479 6.135,6.76 0.771,0.281 10 false FRV- 5.354,7.896 6.125,8.177 0.771,0.281 10 false LFT- 0.594,6.74 3.865,7.156 3.271,0.417 10 false Front Vertical Motor (Power Seat Tilt Motor Assembly (Driver Seat)) 2.719,4.417 3.49,4.698 0.771,0.281 10 false 4 2.708,6.365 3.479,6.646 0.771,0.281 10 false 4 2.719,7.771 3.49,8.052 0.771,0.281 10 false 4 2.719,2.646 3.083,2.958 0.365,0.313 10 false 1 2.719,4.917 3.083,5.229 0.365,0.313 10 false 1 2.698,5.833 3.063,6.146 0.365,0.313 10 false 1 2.698,7.281 3.063,7.594 0.365,0.313 10 false 1 0.917,8.177 3.771,8.625 2.854,0.448 10 false Lifter Motor (Power Seat Lifter Motor Assembly (Driver Seat)) 4.917,0.5 5.688,0.781 0.771,0.281 10 false e23 4.906,2.229 5.677,2.51 0.771,0.281 10 false e23 4.906,4.521 5.677,4.802 0.771,0.281 10 false e23 4.906,5.958 5.677,6.24 0.771,0.281 10 false e23 4.906,7.385 5.677,7.667 0.771,0.281 10 false e23 4.906,2.75 5.677,3.031 0.771,0.281 10 false e24 4.906,5.042 5.677,5.323 0.771,0.281 10 false e23 4.906,6.479 5.677,6.76 0.771,0.281 10 false e24 4.906,7.896 5.677,8.177 0.771,0.281 10 false e24

B567715E06
5.542,1.125 6.156,1.323 0.615,0.198 10 false SLDR 5.531,1.688 6.146,1.885 0.615,0.198 10 false SLDF 5.531,0.563 6.063,0.781 0.531,0.219 10 false SGND 5.125,0.313 5.417,0.521 0.292,0.208 10 false 12 0.938,1.313 1.25,1.51 0.313,0.198 10 false E 5.531,2.25 6.146,2.448 0.615,0.198 10 false RCLR 5.531,2.823 6.146,3.021 0.615,0.198 10 false RCLF 5.531,3.396 6.146,3.594 0.615,0.198 10 false FRVU 5.542,3.958 6.156,4.156 0.615,0.198 10 false FRVD 5.542,4.531 6.156,4.729 0.615,0.198 10 false LFTU 5.542,5.094 6.156,5.292 0.615,0.198 10 false LFTD 5.531,5.656 6.146,5.854 0.615,0.198 10 false LFLR 5.542,6.229 6.156,6.427 0.615,0.198 10 false LFLF 5.104,1.115 5.417,1.313 0.313,0.198 10 false e25 0.625,1.292 0.938,1.49 0.313,0.198 10 false 20 2.531,1.01 2.688,1.208 0.156,0.198 10 false 6 2.531,1.573 2.688,1.771 0.156,0.198 10 false 7 2.531,2.146 2.844,2.344 0.313,0.198 10 false 1 2.542,2.708 2.698,2.906 0.156,0.198 10 false 2 2.542,3.271 2.698,3.469 0.156,0.198 10 false 4 2.531,3.833 2.688,4.031 0.156,0.198 10 false 5 2.542,4.406 2.698,4.604 0.156,0.198 10 false 3 2.542,4.969 2.698,5.167 0.156,0.198 10 false 8 2.531,5.552 2.844,5.75 0.313,0.198 10 false 17 2.531,6.115 2.844,6.313 0.313,0.198 10 false 14 5.135,0.875 5.448,1.073 0.313,0.198 10 false 23 5.177,1.448 5.333,1.646 0.156,0.198 10 false 9 5.135,2.01 5.448,2.208 0.313,0.198 10 false 22 5.167,2.573 5.323,2.771 0.156,0.198 10 false 8 5.177,3.146 5.333,3.344 0.156,0.198 10 false 6 5.135,3.708 5.448,3.906 0.313,0.198 10 false 20 5.167,4.281 5.323,4.479 0.156,0.198 10 false 7 5.146,4.844 5.458,5.042 0.313,0.198 10 false 21 5.115,5.417 5.427,5.615 0.313,0.198 10 false 18 5.167,5.969 5.323,6.167 0.156,0.198 10 false 4 0.542,7.063 2.948,7.708 2.406,0.646 10 false Front Power Seat Switch (Driver Seat) 0.542,6.896 0.854,7.094 0.313,0.198 10 false e17 5.031,6.896 6.99,7.396 1.958,0.5 10 false Position Control ECU Assembly (Driver Seat) 5.104,1.688 5.417,1.885 0.313,0.198 10 false e25 5.083,2.24 5.396,2.438 0.313,0.198 10 false e25 5.083,2.802 5.396,3 0.313,0.198 10 false e25 5.115,3.385 5.427,3.583 0.313,0.198 10 false e25 5.083,3.938 5.396,4.135 0.313,0.198 10 false e25 5.083,4.51 5.396,4.708 0.313,0.198 10 false e25 5.094,5.083 5.406,5.281 0.313,0.198 10 false e25 5.094,5.656 5.406,5.854 0.313,0.198 10 false e25 5.083,6.219 5.396,6.417 0.313,0.198 10 false e25 5.104,0.552 5.417,0.75 0.313,0.198 10 false e25 2,1.031 2.615,1.229 0.615,0.198 10 false SLDR 2,1.594 2.615,1.792 0.615,0.198 10 false SLDF 2,2.146 2.615,2.344 0.615,0.198 10 false RCLR 2.042,2.708 2.656,2.906 0.615,0.198 10 false RCLF 2.073,3.281 2.688,3.479 0.615,0.198 10 false FUP 1.99,3.854 2.604,4.052 0.615,0.198 10 false FDWN 2,4.99 2.615,5.188 0.615,0.198 10 false LDWN 2.094,6.115 2.708,6.313 0.615,0.198 10 false H 2.063,4.417 2.677,4.615 0.615,0.198 10 false LUP 2.115,5.552 2.729,5.75 0.615,0.198 10 false R

PROCEDURE

1.CHECK FRONT POWER SEAT OPERATION
a.

Check that each function of the power seat operates normally by using the front power seat switch (driver seat).

Click hereVehicle Interior>SEAT>FRONT POWER SEAT CONTROL SYSTEM (w/ Memory)>OPERATION CHECK


Result:
Result Proceed to
One or more power seat functions do not operate A
All power seat functions do not operate B



A

2.READ VALUE USING GTS (POWER SEAT SWITCH)

B

GO TO OTHER DIAGNOSIS PROCEDURE (Front Power Seat does not Operate with Front Power Seat Switch)

2.READ VALUE USING GTS (POWER SEAT SWITCH)
a.

Read the Data List according to the display on the GTS.

Body Electrical > Driver Seat > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Reclining Rear Reclining switch signal (Rearward) ON or OFF ON: Reclining switch (Rearward) on
OFF: Reclining switch (Rearward) off
-
Reclining Front Reclining switch signal (Forward) ON or OFF ON: Reclining switch (Forward) on
OFF: Reclining switch (Forward) off
-
Front Vertical Down Front vertical switch signal (Downward) ON or OFF ON: Front vertical switch (Downward) on
OFF: Front vertical switch (Downward) off
-
Front Vertical Up Front vertical switch signal (Upward) ON or OFF ON: Front vertical switch (Upward) on
OFF: Front vertical switch (Upward) off
-
Lifter Switch Down Lifter switch signal (Downward) ON or OFF ON: Lifter switch (Downward) on
OFF: Lifter switch (Downward) off
-
Lifter Switch Up Lifter switch signal (Upward) ON or OFF ON: Lifter switch (Upward) on
OFF: Lifter switch (Upward) off
-
Slide Rear Slide switch signal (Rearward) ON or OFF ON: Slide switch (Rearward) on
OFF: Slide switch (Rearward) off
-
Slide Front Slide switch signal (Forward) ON or OFF ON: Slide switch (Forward) on
OFF: Slide switch (Forward) off
-
Lumbar Switch Front Lumbar support adjuster switch signal (Forward) ON or OFF ON: Lumbar support adjuster switch (Forward) on
OFF: Lumbar support adjuster switch (Forward) off
-
Lumbar Switch Rear Lumbar support adjuster switch signal (Rearward) ON or OFF ON: Lumbar support adjuster switch (Rearward) on
OFF: Lumbar support adjuster switch (Rearward) off
-
Body Electrical > Driver Seat > Data List
Tester Display
Reclining Rear
Reclining Front
Front Vertical Down
Front Vertical Up
Lifter Switch Down
Lifter Switch Up
Slide Rear
Slide Front
Lumbar Switch Front
Lumbar Switch Rear
50003 162 17,18,19,20,21,22,23,24,157,158
OK:

On the GTS screen, ON or OFF is displayed accordingly



Result:
Proceed to
OK
NG



OK

3.PERFORM ACTIVE TEST USING GTS (POWER SEAT MOTOR)

NG

10.INSPECT FRONT POWER SEAT SWITCH (DRIVER SEAT)
3.PERFORM ACTIVE TEST USING GTS (POWER SEAT MOTOR)
a.

Perform the Active Test according to the display on the GTS.

Body Electrical > Driver Seat > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Seat Reclining Seat reclining operation OFF/Rear/Front -
Front Vertical Operation Seat front vertical operation OFF/Down/Up -
Lifter Operation Seat lifter operation OFF/Down/Up -
Seat Slide Operation Seat slide operation OFF/Rear/Front -
Lumbar Slide Lumbar support operation (Forward - Rearward) OFF/Rear/Front -
Body Electrical > Driver Seat > Active Test
Tester Display
Seat Reclining
50004 162 1
Body Electrical > Driver Seat > Active Test
Tester Display
Front Vertical Operation
50004 162 3
Body Electrical > Driver Seat > Active Test
Tester Display
Lifter Operation
50004 162 2
Body Electrical > Driver Seat > Active Test
Tester Display
Seat Slide Operation
50004 162 4
Body Electrical > Driver Seat > Active Test
Tester Display
Lumbar Slide
50004 162 8

Result:
Result Proceed to
All power seat functions operate normally A
Slide function does not operate normally B
Front vertical function does not operate normally C
Lifter function does not operate normally D
Reclining function does not operate normally E
Lumbar support adjustment function does not operate normally F



A

REPLACE POSITION CONTROL ECU ASSEMBLY (DRIVER SEAT)

B

4.INSPECT SLIDE MOTOR (SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY (DRIVER SEAT))

C

5.INSPECT FRONT VERTICAL MOTOR (POWER SEAT TILT MOTOR ASSEMBLY (DRIVER SEAT))

D

6.INSPECT LIFTER MOTOR (POWER SEAT LIFTER MOTOR ASSEMBLY (DRIVER SEAT))

E

7.INSPECT RECLINING MOTOR (SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY (DRIVER SEAT))

F

8.INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY (DRIVER SEAT)
4.INSPECT SLIDE MOTOR (SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY (DRIVER SEAT))

OK

9.CHECK HARNESS AND CONNECTOR (POSITION CONTROL ECU ASSEMBLY (DRIVER SEAT) - POWER SEAT MOTOR)

NG

REPLACE SLIDE MOTOR (SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY (DRIVER SEAT))

5.INSPECT FRONT VERTICAL MOTOR (POWER SEAT TILT MOTOR ASSEMBLY (DRIVER SEAT))

OK

9.CHECK HARNESS AND CONNECTOR (POSITION CONTROL ECU ASSEMBLY (DRIVER SEAT) - POWER SEAT MOTOR)

NG

REPLACE FRONT VERTICAL MOTOR (POWER SEAT TILT MOTOR ASSEMBLY (DRIVER SEAT))

6.INSPECT LIFTER MOTOR (POWER SEAT LIFTER MOTOR ASSEMBLY (DRIVER SEAT))

OK

9.CHECK HARNESS AND CONNECTOR (POSITION CONTROL ECU ASSEMBLY (DRIVER SEAT) - POWER SEAT MOTOR)

NG

REPLACE LIFTER MOTOR (POWER SEAT LIFTER MOTOR ASSEMBLY (DRIVER SEAT))

7.INSPECT RECLINING MOTOR (SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY (DRIVER SEAT))

OK

9.CHECK HARNESS AND CONNECTOR (POSITION CONTROL ECU ASSEMBLY (DRIVER SEAT) - POWER SEAT MOTOR)

NG

REPLACE RECLINING MOTOR (SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY (DRIVER SEAT))

8.INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY (DRIVER SEAT)

OK

9.CHECK HARNESS AND CONNECTOR (POSITION CONTROL ECU ASSEMBLY (DRIVER SEAT) - POWER SEAT MOTOR)

NG

REPLACE LUMBAR SUPPORT ADJUSTER ASSEMBLY (DRIVER SEAT)

9.CHECK HARNESS AND CONNECTOR (POSITION CONTROL ECU ASSEMBLY (DRIVER SEAT) - POWER SEAT MOTOR)
a.

Disconnect the e23 and e24 position control ECU assembly (driver seat) connectors.


b.

Measure the resistance according to the value(s) in the table below.

HINT:

Check the wire harness and connector between the position control ECU assembly (driver seat) and applicable motor.


Standard Resistance:
Slide Motor
Tester Connection Condition Specified Condition
e23-1 (SLD+) - e11-4 Always Below 1 Ω
e23-1 (SLD+) or e11-4 - Body ground Always 10 kΩ or higher
e23-5 (SLD-) - e11-1 Always Below 1 Ω
e23-5 (SLD-) or e11-1 - Body ground Always 10 kΩ or higher

Front Vertical Motor
Tester Connection Condition Specified Condition
e23-7 (FRV+) - e12-1 Always Below 1 Ω
e23-7 (FRV+) or e12-1 - Body ground Always 10 kΩ or higher
e24-4 (FRV-) - e12-4 Always Below 1 Ω
e24-4 (FRV-) or e12-4 - Body ground Always 10 kΩ or higher

Lifter Motor
Tester Connection Condition Specified Condition
e23-6 (LFT+) - e13-1 Always Below 1 Ω
e23-6 (LFT+) or e13-1 - Body ground Always 10 kΩ or higher
e24-5 (LFT-) - e13-4 Always Below 1 Ω
e24-5 (LFT-) or e13-4 - Body ground Always 10 kΩ or higher

Reclining Motor
Tester Connection Condition Specified Condition
e23-10 (RCL+) - g5-4 Always Below 1 Ω
e23-10 (RCL+) or g5-4 - Body ground Always 10 kΩ or higher
e24-6 (RCL-) - g5-1 Always Below 1 Ω
e24-6 (RCL-) or g5-1 - Body ground Always 10 kΩ or higher

Front Lumbar Support Motor
Tester Connection Condition Specified Condition
e23-9 (L+) - g6-1 Always Below 1 Ω
e23-9 (L+) or g6-1- Body ground Always 10 kΩ or higher
e24-3 (L-) - g6-2 Always Below 1 Ω
e24-3 (L-) or g6-2 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

REPLACE POSITION CONTROL ECU ASSEMBLY (DRIVER SEAT)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

10.INSPECT FRONT POWER SEAT SWITCH (DRIVER SEAT)

Click hereVehicle Interior>SEAT>POWER SEAT SWITCH>INSPECTION

Result:
Proceed to
OK
NG



OK

11.CHECK HARNESS AND CONNECTOR (POSITION CONTROL ECU ASSEMBLY (DRIVER SEAT) - FRONT POWER SEAT SWITCH (DRIVER SEAT))

NG

REPLACE FRONT POWER SEAT SWITCH (DRIVER SEAT)

11.CHECK HARNESS AND CONNECTOR (POSITION CONTROL ECU ASSEMBLY (DRIVER SEAT) - FRONT POWER SEAT SWITCH (DRIVER SEAT))
a.

Disconnect the e25 position control ECU assembly (driver seat) connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Ground
Tester Connection Condition Specified Condition
e17-20 (E) - e25-12 (SGND) Always Below 1 Ω
e17-20 (E) or e25-12 (SGND) - Body ground Always 10 kΩ or higher

Slide Function
Tester Connection Condition Specified Condition
e17-6 (SLDR) - e25-23 (SLDR) Always Below 1 Ω
e17-6 (SLDR) or e25-23 (SLDR) - Body ground Always 10 kΩ or higher
e17-7 (SLDF) - e25-9 (SLDF) Always Below 1 Ω
e17-7 (SLDF) or e25-9 (SLDF) - Body ground Always 10 kΩ or higher

Reclining Function
Tester Connection Condition Specified Condition
e17-1 (RCLR) - e25-22 (RCLR) Always Below 1 Ω
e17-1 (RCLR) or e25-22 (RCLR) - Body ground Always 10 kΩ or higher
e17-2 (RCLF) - e25-8 (RCLF) Always Below 1 Ω
e17-2 (RCLF) or e25-8 (RCLF) - Body ground Always 10 kΩ or higher

Front Vertical Function
Tester Connection Condition Specified Condition
e17-4 (FUP) - e25-6 (FRVU) Always Below 1 Ω
e17-4 (FUP) or e25-6 (FRVU) - Body ground Always 10 kΩ or higher
e17-5 (FDWN) - e25-20 (FRVD) Always Below 1 Ω
e17-5 (FDWN) or e25-20 (FRVD) - Body ground Always 10 kΩ or higher

Lifter Function
Tester Connection Condition Specified Condition
e17-3 (LUP) - e25-7 (LFTU) Always Below 1 Ω
e17-3 (LUP) or e25-7 (LFTU) - Body ground Always 10 kΩ or higher
e17-8 (LDWN) - e25-21 (LFTD) Always Below 1 Ω
e17-8 (LDWN) or e25-21 (LFTD) - Body ground Always 10 kΩ or higher

Lumbar Support Adjustment Function
Tester Connection Condition Specified Condition
e17-17 (R) - e25-18 (LFLR) Always Below 1 Ω
e17-17 (R) or e25-18 (LFLR) - Body ground Always 10 kΩ or higher
e17-14 (H) - e25-4 (LFLF) Always Below 1 Ω
e17-14 (H) or e25-4 (LFLF) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

REPLACE POSITION CONTROL ECU ASSEMBLY (DRIVER SEAT)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR