Home › Suspension › FRONT SUSPENSION › FRONT LOWER SUSPENSION ARM
RM37A0E _53 Suspension _086865 FRONT SUSPENSION _0420322 FRONT LOWER SUSPENSION ARM A

FRONT SUSPENSION  FRONT LOWER SUSPENSION ARM  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 48069 1.INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY

a.

Install the front lower arm bushing stopper to the front lower No. 1 suspension arm sub-assembly.


b.
C424017N01
0.792,0.427 0.917,0.583 0.125,0.156 10 true 1 1.344,0.281 1.448,0.417 0.104,0.135 10 true 2 2.125,1.063 2.292,1.24 0.167,0.177 10 false 3

Install the front lower No. 1 suspension arm sub-assembly to the front frame assembly with the 3 bolts and nut in the order shown in the illustration.

Torque:
Bolt (1), (2) : 200 N*m (2039 kgf*cm, 148 ft.*lbf)
Bolt (3) : 135 N*m (1377 kgf*cm, 100 ft.*lbf)

NOTICE:

Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.



c.

Connect the front lower No. 1 suspension arm sub-assembly to the front lower ball joint assembly with the bolt and 2 nuts.

Torque:
92 N*m (938 kgf*cm, 68 ft.*lbf)


Hide 51420 4.INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY (for A25A-FXS, A25B-FXS)

Hide 51444A 5.INSTALL REAR ENGINE UNDER COVER LH (for 2GR-FKS)

Hide 53852B 7.INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

Hide 53851D 8.INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

Hide 9.INSTALL FRONT WHEEL

Hide 10.INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

Hide 11.PERFORM INITIALIZATION

Parking Support Brake System (Click here)
Parking Assist Monitor System (Click here)
Panoramic View Monitor System (Click here)