Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for HV Model)
RM37A0E _58 Vehicle Interior _086896 HEATING / AIR CONDITIONING _0420832 AIR CONDITIONING SYSTEM(for HV Model) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for HV Model)  B1473  A/C Inverter Start-up Signal System  


DESCRIPTION

The inverter activation signal is sent to the compressor with motor assembly from the hybrid vehicle control ECU. Compressor control is stopped and this DTC is stored if there is an open or short in the signal circuit.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory
B1473 A/C Inverter Start-up Signal System Open or short in A/C inverter start-up signal circuit
·

Compressor with motor assembly

·

Hybrid vehicle control ECU

·

Hybrid control system

·

Air conditioning amplifier assembly


-

WIRING DIAGRAM

E432285E01
3.469,2.104 3.927,2.302 0.458,0.198 10 false LIN 1.396,1.052 1.854,1.25 0.458,0.198 10 false 2 5.885,4.031 7.094,4.396 1.208,0.365 10 false Air Conditioning Amplifier Assembly 0.771,3.51 1.229,3.708 0.458,0.198 10 false DOUT 0.917,0.698 1.375,0.896 0.458,0.198 10 false IG1 0.833,1.25 1.292,1.448 0.458,0.198 10 false GND 0.969,5.125 1.427,5.323 0.458,0.198 10 false PB 0.969,5.635 1.427,5.833 0.458,0.198 10 false PE 1.344,5.115 1.781,5.292 0.438,0.177 10 false m1 1.313,3.5 1.75,3.677 0.438,0.177 10 false C65 3.292,1.938 3.75,2.135 0.458,0.198 10 false 2 1.396,0.479 1.854,0.677 0.458,0.198 10 false 1 1.385,3.292 1.844,3.49 0.458,0.198 10 false 3 1.406,4.927 1.865,5.125 0.458,0.198 10 false 2 1.396,5.438 1.865,5.635 0.469,0.198 10 false 1 2.927,2.427 3.385,2.625 0.458,0.198 10 false M7 2.927,2.594 5.031,2.833 2.104,0.24 10 false Battery State Sensor Assembly 2.167,0.833 3.24,1.115 1.073,0.281 10 false ECU-IG1 NO. 3 1.885,6.188 3.49,6.427 1.604,0.24 10 false HV Air Conditioning Wire 0.25,6.177 1.292,6.573 1.042,0.396 10 false Compressor with Motor Assembly 0.979,7.438 2.74,7.646 1.76,0.208 10 false : CAN Communication Line 0.979,7 2.625,7.219 1.646,0.219 10 false : LIN Communication Line 4.094,6.188 6.156,6.406 2.063,0.219 10 false Inverter with Converter Assembly 3.75,5.115 4.01,5.323 0.26,0.208 10 false m2 3.021,4.021 4.74,4.271 1.719,0.25 10 false Hybrid Vehicle Control ECU 3.052,3.51 3.49,3.688 0.438,0.177 10 false A31 3.802,4.917 4.021,5.125 0.219,0.208 10 false 1 3.813,5.438 4.271,5.635 0.458,0.198 10 false 2 4.146,5 4.583,5.177 0.438,0.177 10 false ACPB 4.146,5.521 4.583,5.698 0.438,0.177 10 false ACPE 3.458,3.51 3.896,3.688 0.438,0.177 10 false LIN3 3.146,3.313 3.604,3.51 0.458,0.198 10 false 8 3.75,0.688 5.74,0.885 1.99,0.198 10 false from IG1-NO. 1 Relay 1.344,5.635 1.781,5.813 0.438,0.177 10 false m1 1.313,1.26 1.75,1.438 0.438,0.177 10 false C65 1.313,0.688 1.75,0.865 0.438,0.177 10 false C65 3.75,5.635 4.01,5.844 0.26,0.208 10 false m2

CAUTION / NOTICE / HINT

CAUTION:
·

Before inspecting the high-voltage system, take safety precautions such as wearing insulated gloves and removing the service plug grip to prevent electrical shocks. After removing the service plug grip, put it in your pocket to prevent other technicians from accidentally reconnecting it while you are working on the high-voltage system.

·

Do not touch the high-voltage connectors or terminals for 10 minutes after the service plug grip is removed.



NOTICE:
·

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION

·

The hybrid control system and air conditioning system output DTCs separately. Perform troubleshooting for the hybrid control system first if DTCs for both systems are output simultaneously.

·

The air conditioning system uses the CAN communication system. Inspect the communication functions by following How to Proceed with Troubleshooting. Troubleshoot the air conditioning system after confirming that the communication systems are functioning properly.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HV Model)>HOW TO PROCEED WITH TROUBLESHOOTING



PROCEDURE

1.CHECK FOR DTC
a.

Check for DTCs.

Body Electrical > Air Conditioner > Trouble Codes
50001 121

Result:
Result Proceed to
Only B1473 is output A
B1473 and B1498 are output simultaneously B



A

2.CHECK FOR DTC

B

2.CHECK FOR DTC
a.

Check for DTCs.

Powertrain > Hybrid Control > Trouble Codes
50001 236

Result:
Result Proceed to
DTCs are not output A
DTCs are output B



A

3.PERFORM ACTIVE TEST USING GTS (COMPRESSOR TARGET SPEED)

B

3.PERFORM ACTIVE TEST USING GTS (COMPRESSOR TARGET SPEED)
a.

Perform the Active Test according to the display on the GTS.

Body Electrical > Air Conditioner > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Compressor Target Speed Compressor with motor assembly Min.: 0
Max.: 7500
-
Body Electrical > Air Conditioner > Active Test
Tester Display
Compressor Target Speed
50004 121 18
OK:

Compressor with motor assembly operates normally.



Result:
Proceed to
OK
NG



OK

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

NG