Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › CLEARANCE WARNING ECU (for RHD) › from 2020.11
RM37A0E _56 Audio / Visual / Telematics _086880 PARK ASSIST / MONITORING _0445333 CLEARANCE WARNING ECU(for RHD) A

PARK ASSIST / MONITORING  CLEARANCE WARNING ECU(for RHD)  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during clearance warning ECU assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)
Replaced Part or Performed Procedure Necessary Procedures Effect/Inoperative Function When Necessary Procedures are not Performed Link
w/o Parking Support Brake System:

Clearance warning ECU assembly


Registration of bumper type TOYOTA Parking Assist-sensor System (w/o Parking Support Brake System) (Click here)
w/ Parking Support Brake System:

Clearance warning ECU assembly


·

Measurement of ultrasonic sensor detection angle

·

Steering angle neutral point

·

Bumper type registration

·

Ultrasonic sensor detection angle registration


·

TOYOTA Parking Assist-sensor System (w/ Parking Support Brake System (Forward/reverse Type))

·

TOYOTA Parking Assist-sensor System (w/ Parking Support Brake System (Reverse Only Type))

·

Parking Support Brake System


(Click here)

Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
Replaced Part or Performed Procedure Necessary Procedures Effect/Inoperative Function When Necessary Procedures are not Performed Link
w/o Parking Support Brake System:

Clearance warning ECU assembly


Registration of bumper type TOYOTA Parking Assist-sensor System (w/o Parking Support Brake System) (Click here)
w/ Parking Support Brake System:

Clearance warning ECU assembly


·

Measurement of ultrasonic sensor detection angle

·

Steering angle neutral point

·

Bumper type registration

·

Ultrasonic sensor detection angle registration


·

TOYOTA Parking Assist-sensor System (w/ Parking Support Brake System (Forward/reverse Type))

·

TOYOTA Parking Assist-sensor System (w/ Parking Support Brake System (Reverse Only Type))

·

Parking Support Brake System


(Click here)

PROCEDURE

Hide 73900 1.REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

Hide 55308B 2.REMOVE NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY

Hide 82877 3.REMOVE ECU INTEGRATION BOX RH

Hide 89340A 4.REMOVE CLEARANCE WARNING ECU ASSEMBLY

a.
E448989C01
1.375,2 1.26,1.74 true 1.292,1.979 1.604,2.177 0.313,0.198 10 false *a
*a Protective Tape
V113147

Remove in this Direction


Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the clearance warning ECU assembly as shown in the illustration.

NOTICE:
·

If the ECU integration box is deformed or damaged, replace it.

·

Do not bend the claw more than necessary.