| Pre-Collision System Malfunction Visit Your Dealer
|
X2000
|
Yaw Rate Sensor Malfunction
|
The forward recognition camera received a yaw rate sensor malfunction signal from the No. 2 skid control ECU (brake actuator assembly).
|
Perform troubleshooting for the electronically controlled brake system.
( )
|
| Pre-Collision System Malfunction Visit Your Dealer
|
X2001
|
Steering Angle Sensor Malfunction
|
The forward recognition camera received a steering sensor malfunction signal from the steering sensor.
|
Perform troubleshooting for the electronically controlled brake system.
( )
|
| Pre-Collision System Malfunction Visit Your Dealer
|
X2002
|
Accelerator Sensor Malfunction
|
The forward recognition camera received an accelerator pedal position sensor malfunction signal from the hybrid vehicle control ECU.
|
Perform troubleshooting for the hybrid control system.
for 4WD/AWD:( )
for 2WD:( )
|
| Pre-Collision System Malfunction Visit Your Dealer
|
X2003
|
Brake Control System Malfunction
|
The forward recognition camera received an electronically controlled brake system malfunction signal from the No. 2 skid control ECU (brake actuator assembly).
|
Perform troubleshooting for the electronically controlled brake system.
( )
|
| Pre-Collision System Malfunction Visit Your Dealer
|
X2011
|
Front Recognition Camera System Software Not Programmed
|
The forward recognition camera cannot store the vehicle information.
|
Perform troubleshooting for the front camera system.
( )
|
| Pre-Collision System Malfunction Visit Your Dealer
|
X2012
|
Front Recognition Camera Malfunction
|
The forward recognition camera detected an internal malfunction.
|
Perform troubleshooting for the front camera system.
( )
|
| Pre-Collision System Malfunction Visit Your Dealer
|
X2013
|
Front Recognition Camera Optical Axis Misalignment Malfunction
|
The forward recognition camera detected optical axis misalignment.
|
Refer to DTC C1AA800 in Front Camera System
( )
|
| Pre-Collision System Malfunction Visit Your Dealer
|
X2014
|
Front Recognition Camera Optical Axis Not Adjusted
|
Forward recognition camera optical axis adjustment has not been performed.
|
If this Vehicle Control History code is output, perform forward recognition camera optical axis adjustment, clear the Vehicle Control History and then check that this code is not stored again.
- HINT:
-
Forward recognition camera axis alignment can be performed by using either One Time Recognition, Sequential Recognition or Driving Adjustment.
-
One Time Recognition: Click here( )
-
Sequential Recognition: Click here( )
-
Driving Adjustment: Click here( )
|
| Front Camera Low Visibility Unavailable See Owner's Manual
|
X2015
|
Front Recognition Camera Dirt
|
System operation was temporarily suspended due to the forward recognition camera not being able to detect objects.
|
Refer to Vehicle Control History code X2015 of Front Camera System.
( )
|
| Front Camera Out of Temperature Range Unavailable Wait until Normal Temperature
|
X2016
|
Front Recognition Camera Outside Guaranteed Operating Temperature
|
System operation was temporarily suspended due to the forward recognition camera being excessively hot or cold.
|
Refer to Vehicle Control History code X2016 of Front Camera System.
( )
|
| Front Camera Unavailable See Owner's Manual
|
X2017
|
Front Recognition Camera Outside Guaranteed Operating Voltage
|
System operation was temporarily suspended due to the forward recognition camera power source voltage being excessively high or low.
|
Refer to Vehicle Control History code X2017 of Front Camera System.
( )
|
| Pre-Collision System Malfunction Visit Your Dealer
|
X2018
|
Front Recognition Camera Heater Malfunction
|
The forward recognition camera detected a forward recognition camera heater malfunction.
|
Perform troubleshooting for the front camera system.
( )
|
| Pre-Collision System Malfunction Visit Your Dealer
|
X201D
|
Front Recognition Camera System Software Malfunction
|
The forward recognition camera detected a specification information malfunction.
|
Perform troubleshooting for the front camera system.
( )
|
| Front Camera Unavailable See Owner's Manual
|
X201F
|
Front Recognition Camera Temporary Unavailable (Front Recognition Camera Recognition Stop)
|
The forward recognition camera operation was suspended.
|
Perform troubleshooting for the front camera system.
( )
|
| Pre-Collision System Malfunction Visit Your Dealer
|
X2020
|
Front Radar Sensor Destination Malfunction
|
The forward recognition camera received a destination information malfunction signal from the millimeter wave radar sensor assembly.
|
Perform troubleshooting for the front radar sensor system.
( )
|
| Pre-Collision System Malfunction Visit Your Dealer
|
X2021
|
Front Radar Sensor Malfunction
|
The forward recognition camera received a malfunction signal from the millimeter wave radar sensor assembly.
|
Perform troubleshooting for the front radar sensor system.
( )
|
| Pre-Collision System Malfunction Visit Your Dealer
|
X2022
|
Front Radar Sensor Optical Axis Misalignment Malfunction
|
The forward recognition camera received a beam axis misalignment malfunction signal from the millimeter wave radar sensor assembly.
|
Refer to DTC C1A1100 in front radar sensor system
( )
|
| Pre-Collision System Malfunction Visit Your Dealer
|
X2023
|
Front Radar Sensor Optical Axis Not Adjusted
|
The forward recognition camera received a beam axis unadjusted signal from the millimeter wave radar sensor assembly.
|
If this code is output, perform millimeter wave radar sensor assembly beam axis adjustment, clear the Vehicle Control History and then check that this code is not output again.
- HINT:
-
Beam axis alignment of the millimeter wave radar sensor assembly can be performed using either Triangle Target, Flat Surface Target or Driving Adjustment.
-
Triangle Target: Click here( )
-
Flat Surface Target: Click here( )
-
Driving Adjustment: Click here( )
|
| Pre-Collision System Radar In Self Calibration Unavailable See Owner's Manual
|
X2025
|
Front Radar Sensor Temporary Unavailable (Horizontal Direction Optical Axis Misalignment)
|
The forward recognition camera received a beam axis horizontal misalignment signal from the millimeter wave radar sensor assembly.
|
Perform millimeter wave radar sensor assembly beam axis adjustment.
- HINT:
-
Beam axis alignment of the millimeter wave radar sensor assembly can be performed using either Triangle Target, Flat Surface Target or Driving Adjustment.
-
Triangle Target: Click here( )
-
Flat Surface Target: Click here( )
-
Driving Adjustment: Click here( )
|
| Pre-Collision System Radar Sensor Blocked Unavailable Clean Radar Sensor
|
X2026
|
Front Radar Sensor Dirt
|
The forward recognition camera received a millimeter wave radar sensor assembly dirty signal from the millimeter wave radar sensor assembly.
|
Refer to Vehicle Control History code X2026 of front radar sensor system.
( )
|
| Pre-Collision System Out of Temperature Range Unavailable See Owner's Manual
|
X2027
|
Front Radar Sensor Outside Guaranteed Operating Temperature
|
The forward recognition camera received a temperature malfunction signal from the millimeter wave radar sensor assembly.
|
Refer to Vehicle Control History code X2027 of front radar sensor system.
( )
|
| Pre-Collision System Unavailable See Owner's Manual
|
X2028
|
Front Radar Sensor Outside Guaranteed Operating Voltage
|
The forward recognition camera received a voltage malfunction signal from the millimeter wave radar sensor assembly.
|
Refer to Vehicle Control History code X2028 of front radar sensor system.
( )
|
| Pre-Collision System Malfunction Visit Your Dealer
|
X2070
|
Communication Error from Pre-Collision System to Front Radar Sensor
|
Communication malfunction occurred between the forward recognition camera and millimeter wave radar sensor assembly.
|
Perform troubleshooting for the front radar sensor system.
( )
|
| Pre-Collision System Malfunction Visit Your Dealer
|
X2074
|
Communication Error from Pre-Collision System to Power Steering Control System
|
Recorded when a communication malfunction was detected between the power steering ECU (rack and pinion power steering gear assembly) and the millimeter wave radar sensor assembly.
|
Perform troubleshooting for the power steering system.
( )
|
| Pre-Collision System Malfunction Visit Your Dealer
|
X2081
|
Power Steering Control System for Steering Assist Invalid
|
Recorded when steering assist control by the power steering ECU (rack and pinion power steering gear assembly) was unavailable.
|
Perform troubleshooting for the power steering system.
( )
|
| Pre-Collision System Malfunction Visit Your Dealer
|
X2082
|
Power Steering Control System for Steering Assist Steering Angle Malfunction
|
Recorded when a steering assist angle malfunction from the power steering ECU (rack and pinion power steering gear assembly) was detected.
|
Perform troubleshooting for the power steering system.
( )
|