Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL (for Gasoline Model RHD) › from 2020.11
RM37A0E _54 Brake _086869 BRAKE SYSTEM (OTHER) _0449075 BRAKE PEDAL(for Gasoline Model RHD) N

BRAKE SYSTEM (OTHER)  BRAKE PEDAL(for Gasoline Model RHD)  ADJUSTMENT  


PROCEDURE

Hide 1.INSPECT AND ADJUST BRAKE PEDAL HEIGHT

a.

Remove the front door scuff plate RH.

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>REMOVAL



b.

Remove the cowl side trim sub-assembly RH.

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>REMOVAL



c.


e.

Check the brake pedal height.

HINT:

Inspect and adjust the brake pedal height with the floor carpet and front floor mat folded back.


i.

Measure the shortest distance between the brake pedal pad surface and floor panel as shown in the illustration.

C447468C01
1.792,2.104 1.792,1.604 true 2.313,2.573 2.313,2.323 true 2.323,1.396 2.406,0.896 2.406,0.896 2.656,0.896 true 4.885,2.313 5.135,2.313 5.135,2.313 5.385,1.896 true 5.813,0.729 5.979,0.396 5.979,0.396 6.229,0.396 false 1.719,2.135 1.906,2.333 0.188,0.198 10 true *1 2.823,1.646 3.052,1.833 0.229,0.188 10 true *a 2.26,2.583 2.458,2.771 0.198,0.188 10 true *b 2.708,0.802 2.927,0.99 0.219,0.188 10 true *c 0.813,1.146 1,1.333 0.188,0.188 10 true *d 4.698,2.24 4.896,2.427 0.198,0.188 10 false *b 6.021,1.427 6.25,1.615 0.229,0.188 10 true *a 6.271,0.313 6.521,0.479 0.25,0.167 10 true *1
*1 Brake Pedal Pad - -
*a Brake Pedal Height *b Measuring Plane of Floor Panel
*c Ruler *d 36 mm (1.42 in.)


Brake Pedal Height from Floor Panel:

158.6 to 174.6 mm (6.24 to 6.87 in.)


HINT:

If the brake pedal height is not as specified, inspect and adjust the push rod length according to the procedure below.




f.

Adjust the push rod length.

i.
C447469C01
1.646,1.563 1.646,0.479 1.646,0.479 1.979,0.479 true 1.448,4.135 1.75,4.135 1.75,4.135 2.042,3.792 true 2.333,1.833 2.583,1.833 false 2.021,0.396 2.333,0.552 0.313,0.156 10 false *1 2.625,1.76 2.938,1.917 0.313,0.156 10 false *2 1.281,4.063 1.625,4.271 0.344,0.208 10 false *a 2.583,3.417 2.896,3.573 0.313,0.156 10 false *b
*1 Lock Nut
*2 Stop Light Switch Assembly
*a Measuring Plane of Floor Panel
*b Brake Pedal Height


Remove the stop light switch assembly.

Click hereVehicle Exterior>LIGHTING (EXT)>STOP LIGHT SWITCH>REMOVAL


ii.

Loosen the lock nut.


iii.

Adjust the brake pedal height by turning the push rod.

Brake Pedal Height from Floor Panel:

158.6 to 174.6 mm (6.24 to 6.87 in.)



iv.

Tighten the lock nut.

Torque:
26 N*m (265 kgf*cm, 19 ft.*lbf)


v.

Install the stop light switch assembly.

Click hereVehicle Exterior>LIGHTING (EXT)>STOP LIGHT SWITCH>INSTALLATION





i.

Install the cowl side trim sub-assembly RH.

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION



j.

Install the front door scuff plate RH.

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION



Hide 2.INSPECT BRAKE PEDAL FREE PLAY

a.

Stop the engine and firmly depress the brake pedal several times until no vacuum is left in the brake booster.


b.
C132708C09
2.167,1.563 2.469,1.781 0.302,0.219 10 false *a
*a Brake Pedal Free Play


Depress the brake pedal until a slight resistance is felt. Measure the distance as shown in the illustration.

Brake Pedal Free Play:

1.0 to 6.0 mm (0.0394 to 0.236 in.)


HINT:
·

If the brake pedal free play is not as specified, check the stop light switch clearance.

Click hereVehicle Exterior>LIGHTING (EXT)>STOP LIGHT SWITCH>INSTALLATION

·

If the brake pedal free play is as specified, proceed to the Inspect Brake Pedal Reserve Distance procedure.




Hide 3.INSPECT BRAKE PEDAL RESERVE DISTANCE

a.

With the engine running, depress the brake pedal and measure the brake pedal reserve distance as shown in the illustration.

C447470C01
2.021,2.073 2.021,1.74 true 2.719,1.333 3.052,1.333 true 1.417,1.917 1.583,1.917 1.583,1.917 1.583,1.552 true 4.385,1.49 4.635,1.49 4.635,1.49 4.969,1.042 true 5.479,0.802 5.646,0.552 5.646,0.552 5.896,0.552 true 2.5,1.427 2.5,0.76 2.5,0.76 2.75,0.76 true 2.333,2.49 2.333,1.99 true 1.927,2.104 2.115,2.281 0.188,0.177 10 true *1 2.448,2.208 2.625,2.396 0.177,0.188 10 true *a 3.073,1.24 3.281,1.427 0.208,0.188 10 true *b 1.198,1.833 1.396,2.01 0.198,0.177 10 true *d 1,1.292 1.198,1.458 0.198,0.167 10 true *e 4.198,1.406 4.406,1.594 0.208,0.188 10 false *b 5.938,0.458 6.125,0.635 0.188,0.177 10 true *1 5.479,2.198 5.656,2.385 0.177,0.188 10 true *a 2.771,0.667 2.969,0.844 0.198,0.177 10 true *d 2.25,2.51 2.427,2.698 0.177,0.188 10 true *c
*1 Brake Pedal Pad - -
*a Brake Pedal Reserve Distance *b Measuring Plane of Floor Panel
*c Hole of Floor Panel *d Ruler
*e 36 mm (1.42 in.) - -


Brake Pedal Reserve Distance from Floor Panel at 300 N (31 kgf, 67.4 lbf):

113 mm (4.45 in.) or more