Home › Engine / Hybrid System › A25A-FXS, A25B-FXS (FUEL) › FUEL PUMP ECU › from 2020.11
RM37A0E _51 Engine / Hybrid System _086907 A25A-FXS, A25B-FXS FUEL _0417789 FUEL PUMP ECU A

A25A-FXS, A25B-FXS FUEL  FUEL PUMP ECU  INSTALLATION  


PROCEDURE

Hide 89573 1.INSTALL FUEL PUMP CONTROL ECU BRACKET

a.

Install the fuel pump control ECU bracket to the fuel pump control ECU with the 2 bolts.

Torque:
4.5 N*m (46 kgf*cm, 40 in.*lbf)


Hide 89571 2.INSTALL FUEL PUMP CONTROL ECU

a.

Install the fuel pump control ECU to the vehicle body with the 2 nuts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)

NOTICE:

Do not reuse the fuel pump control ECU if it has been dropped or subjected to a severe impact.



b.

Connect the 2 fuel pump control ECU connectors.


Hide 86160Y 3.INSTALL REAR NO. 2 SPEAKER ASSEMBLY (w/ Woofer)

Hide 64740C 4.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

Hide 64725F 6.INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

Hide 64974 7.INSTALL DECK TRIM POCKET COVER

Hide 64715E 8.INSTALL NO. 2 DECK SIDE TRIM COVER

Hide 64713F 9.INSTALL FRONT DECK SIDE TRIM COVER LH

Hide 62332C 10.CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

Hide 67918A 11.INSTALL REAR DOOR SCUFF PLATE LH

Hide 72138M 12.INSTALL REAR OUTER SEAT TRACK BRACKET COVER LH

Hide 58387B 13.INSTALL REAR FLOOR FINISH PLATE

Hide 14.INSTALL REAR NO. 2 SEAT ASSEMBLY