Home › Engine / Hybrid System › STOP AND START › ENGINE STOP AND START ECU › from 2020.11
RM37A0E _51 Engine / Hybrid System _094408 STOP AND START _0452241 ENGINE STOP AND START ECU A

STOP AND START  ENGINE STOP AND START ECU  INSTALLATION  


PROCEDURE

Hide 8926A 1.INSTALL ENGINE STOP AND START SOLENOID FILTER

Hide 89261A 2.INSTALL ENGINE STOP AND START ECU

a.

Install the engine stop and start ECU with the bolt and nut.

Torque:
Bolt : 12.5 N*m (127 kgf*cm, 9 ft.*lbf)
Nut : 5.5 N*m (56 kgf*cm, 49 in.*lbf)


b.

Connect the 3 engine stop and start ECU connectors.


c.

Connect the engine stop and start solenoid filter connector.


d.

Connect each connector.


e.

Engage the clamp.


f.

Connect each connector.


Hide 55303B 3.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

HINT:

Use the same procedure for the RHD and LHD.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>INSTALLATION


Hide 55607 4.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

HINT:

Use the same procedure for the RHD and LHD.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>INSTALLATION


Hide 5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL