89981
1.INSTALL HYBRID VEHICLE CONTROL ECU (for LHD)
Engage the 2 claws to install the hybrid vehicle control ECU to the ECU integration box LH.
Make sure that the hybrid vehicle control ECU is securely installed.
82878
2.INSTALL ECU INTEGRATION BOX LH (for LHD)
Install the ECU integration box LH with the 2 bolts and nut.
Connect the 3 hybrid vehicle control ECU connectors as shown in the illustration.
Connect each connector.
86572
3.INSTALL VEHICLE APPROACHING SPEAKER CONTROLLER (for RHD)
89981
4.INSTALL HYBRID VEHICLE CONTROL ECU (for RHD)
Install the hybrid vehicle control ECU with the nut and bolt.
Connect the 3 hybrid vehicle control ECU connectors as shown in the illustration.
Connect the vehicle approaching speaker controller connector.
Connect each connector.
Engage the clamp.
Connect each connector.
55308B
5.INSTALL NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY (for LHD)
73900
6.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for LHD)
55303B
7.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for RHD)
Use the same procedure for the RHD and LHD.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>INSTALLATION
55607
8.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)
Use the same procedure for the RHD and LHD.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>INSTALLATION
9.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
58441L
10.INSTALL BATTERY SERVICE HOLE COVER
11.PERFORM INITIALIZATION