78111
1.INSTALL ACCELERATOR PEDAL
Engage the claw to install the accelerator pedal.
Install the 2 bolts.
78118
2.INSTALL ACCELERATOR PEDAL PAD
Engage the 4 claws to install the accelerator pedal pad to the accelerator pedal.
78110K
3.INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY
Avoid physical shock to the accelerator pedal sensor assembly.
Do not disassemble the accelerator pedal sensor assembly.
This accelerator pedal sensor assembly does not require lubrication.
Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.
Connect the rod of the accelerator pedal sensor assembly to the accelerator pedal and install the accelerator pedal sensor assembly with the 3 nuts.
Connect the accelerator pedal sensor assembly connector.
55606
4.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)
62112A
5.INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH (for LHD)
67914
6.INSTALL FRONT DOOR SCUFF PLATE LH (for LHD)
62111A
7.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH (for RHD)
Use the same procedure as for the LH side.
67913
8.INSTALL FRONT DOOR SCUFF PLATE RH (for RHD)
Use the same procedure as for the LH side.