89111
1.INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (for LHD)
|
Install in this Direction |
Engage the 2 claws to install the central gateway ECU (network gateway ECU) as shown in the illustration.
Make sure that the central gateway ECU (network gateway ECU) is securely installed.
82877
2.INSTALL ECU INTEGRATION BOX RH (for LHD)
Install the ECU integration box RH with the bolt and nut.
Engage the 2 clamps.
Connect each connector.
55303B
3.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for LHD)
55607
4.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)
55435A
5.INSTALL INSTRUMENT PANEL FINISH END PANEL RH (for LHD)
62311B
6.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for LHD)
62111A
7.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH (for LHD)
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
67913
8.INSTALL FRONT DOOR SCUFF PLATE RH (for LHD)
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
89111
9.INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (for RHD)
|
Install in this Direction |
Engage the 2 claws to install the central gateway ECU (network gateway ECU) as shown in the illustration.
Make sure that the central gateway ECU (network gateway ECU) is securely installed.
82877
10.INSTALL ECU INTEGRATION BOX RH (for RHD)
Install the ECU integration box RH with the bolt and 2 nuts.
Engage the clamp.
Connect each connector.
55308B
11.INSTALL NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY (for RHD)
Install the No. 3 instrument panel to cowl brace sub-assembly with the bolt and nut.
73900
12.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for RHD)